2000 Escalade console latch

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jeff Groves

Jeff Groves

Retired Demo Expert. I don't need to run anymore!
Supporting Member
Joined
Mar 26, 2019
Posts
526
Reaction score
554
Location
Nevada, Ohio
I've started 3D modleing the release system for that pesky top lid latch.
(If you have a broken system? You know what I'm talking about!)
I found good pictures of the parts so plan to 3D Print them to fix my lid.
Think I may put "Bomb Release" On that button. :laughing1:

latch-3.JPG
 
Last edited:
OP
OP
Jeff Groves

Jeff Groves

Retired Demo Expert. I don't need to run anymore!
Supporting Member
Joined
Mar 26, 2019
Posts
526
Reaction score
554
Location
Nevada, Ohio
Today I remove that top lid so I can start the measuring for the parts needed.
I have none of the stock parts as the lid was screwed down and would not open.
The first part I make will be the slider latch. That way I can get the scale and find proper springs.
I'll also trace the shape of the visible outer contour and use that as a pattern in 3Ds Max to make the basic shape of the hold down system. And get measurements for that part.
Then I'll make the actual button part after that.
One thing I plan to do is make that hold down part WAY stronger! Just looking at the pictures tells me why they break.
I'll print in Petg for max UV resistance and temperature stability.
 
OP
OP
Jeff Groves

Jeff Groves

Retired Demo Expert. I don't need to run anymore!
Supporting Member
Joined
Mar 26, 2019
Posts
526
Reaction score
554
Location
Nevada, Ohio
Started the base latch part that holds the lid down.
I had to adjust the scale in 3Ds Max to match my slicer program.
I figure I'm about 80% done with it after a few test prints.
Now to source the springs and finish that part before starting the other 2 parts.

I'll use some clay to do some measuring for the next parts.
Put the clay in the latch area and close the lid. That will give me the thickness I can work with.
 
Last edited:
OP
OP
Jeff Groves

Jeff Groves

Retired Demo Expert. I don't need to run anymore!
Supporting Member
Joined
Mar 26, 2019
Posts
526
Reaction score
554
Location
Nevada, Ohio
Down the road a bit and I have most of the parts designed.
A few more days and I should have the working prototype done.

And NO. I will not release the STL files!
 
Last edited:
OP
OP
Jeff Groves

Jeff Groves

Retired Demo Expert. I don't need to run anymore!
Supporting Member
Joined
Mar 26, 2019
Posts
526
Reaction score
554
Location
Nevada, Ohio
Prototype work is going great. Once everything is tested and working as it should?
I'll finish the detail and print at a finer setting.
latch.jpg
 
OP
OP
Jeff Groves

Jeff Groves

Retired Demo Expert. I don't need to run anymore!
Supporting Member
Joined
Mar 26, 2019
Posts
526
Reaction score
554
Location
Nevada, Ohio
I'd like to find someone that needs just the outter part and has all the internal parts.
I'd send a test print of that to them at no cost.
 
You must log in or register to reply here.

Similar threads

J
Spare FPCM (Fuel Pump Control Module) WISE IDEA!!!!
Replies
0
Views
115
jfoj
J
JimBe937
My Yukon Troubles!
2
Replies
12
Views
1K
j91z28d1
J
L
99 Yukon Denali flashers & brakes dead Resetting BCM??
Replies
3
Views
962
Eman85
E
West 1
New AC Compressor start up issue
Replies
0
Views
420
West 1
West 1
C
07 Yukon - New Member
Replies
9
Views
1K
wjburken
wjburken

Forum statistics

Threads
132,780
Posts
1,874,206
Members
97,620
Latest member
rando123456

Latest posts

Top