2013 Chevy Suburban LT heated steering wheel upgrade

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

petethepug

Michael
Joined
May 4, 2016
Posts
3,374
Reaction score
3,804
Location
SoCal
* Must have 07-14 full size SUV or 07-13 full size pick up with steering wheel heat element embedded option.

* Purchase OEM clockspring with equipped for heated SW option. Aftermarket Dorman clockspring known to have issues.

* Review posts on the install procedure and where to pull a single power lead to it. Approx 07/08 used an in line fuse from the fuse box and approx 09 used a dedicated lead from the fuse box marked for steering wheel heater.
 

FatBob

Member
Joined
Jan 9, 2015
Posts
60
Reaction score
17
you need the steering wheel with heat option and a clock spring that matches it, then you just need to run a power wire to the clockspring from a accessory power source.
the clock spring sends the power to the steering wheel you just need to connect the power to the clock spring connector.
you want accessory power so that you don't ever even accidentally leave the steering heat button on and drain the battery.
you can find the bcm power pin outs with the gm upfitter guide which is free online
You are correct.
I will add you need to also run a ground wire.
From experience with a 2011 Silverado, be sure to use an accessory 12 volt source. The battery will still drain, even if the switch for the heated wheel is not left ON. I had to rewire mine from a hot at all times to an accessory switch 12 volt source. No idea why the battery drained, but the heated wheel was not turned on.
 

buckwild27

Full Access Member
Joined
Feb 7, 2024
Posts
236
Reaction score
465
You are correct.
I will add you need to also run a ground wire.
From experience with a 2011 Silverado, be sure to use an accessory 12 volt source. The battery will still drain, even if the switch for the heated wheel is not left ON. I had to rewire mine from a hot at all times to an accessory switch 12 volt source. No idea why the battery drained, but the heated wheel was not turned on.
With the stuff i have it plugs into the factory port for the heated wheel
 
Last edited:

Forum statistics

Threads
133,655
Posts
1,888,905
Members
98,897
Latest member
eb5665
Top