Crank no start issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Shane5acosta

TYF Newbie
Joined
Jan 26, 2025
Posts
6
Reaction score
0
I just bought a 99 Tahoe 5.7 vortex. The previous owner claimed he was driving around the farm and ran good. He went inside came back out and it was dead.
I tried to fix it bought new battery, spark plugs, ignition coil, distributor cap and rotor. Checked fuel pressure (58 psi). Checked wiring to starter all looking good with solid connections.
Im stuck any advice/ideas?
 

Eman85

Full Access Member
Joined
Apr 18, 2021
Posts
476
Reaction score
704
Dead means?? Does it turn over? Compression? Spark?
 
OP
OP
S

Shane5acosta

TYF Newbie
Joined
Jan 26, 2025
Posts
6
Reaction score
0
Dead means?? Does it turn over? Compression? Spark?
It’s cranking but not turning over and I believe it has compression but I don’t have a compression tester is there a way to test without it? And I’m in the process of replacing everything for the spark last thing would be the starter.
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,540
Reaction score
25,584
Location
Elev 5,280
"Cranking" is "turning over." So you have a "crank - no start" condition.
 

exp500

Full Access Member
Joined
May 14, 2017
Posts
1,879
Reaction score
1,745
I just bought a 99 Tahoe 5.7 vortex. The previous owner claimed he was driving around the farm and ran good. He went inside came back out and it was dead.
I tried to fix it bought new battery, spark plugs, ignition coil, distributor cap and rotor. Checked fuel pressure (58 psi). Checked wiring to starter all looking good with solid connections.
Im stuck any advice/ideas?
Fuel pressure low. Any codes set?
 
OP
OP
S

Shane5acosta

TYF Newbie
Joined
Jan 26, 2025
Posts
6
Reaction score
0
Fuel pressure low. Any codes set?
What is it supposed to be at I connected the fuel pressure gauge and it read 58 psi when I put the key into the on position and I don’t believe so im on my way home right now I’ll double check
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,978
Reaction score
40,771
Location
Stockton, Ca.
What is it supposed to be at I connected the fuel pressure gauge and it read 58 psi when I put the key into the on position and I don’t believe so im on my way home right now I’ll double check
the ignition control module is a classic to fail on these, causing a inexplicable no start or just "died" while driving
 

Forum statistics

Threads
133,374
Posts
1,884,395
Members
98,483
Latest member
hackjob1
Top