Squeak from Serpentine Belt Area

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

black tahoe 08

TYF Newbie
Joined
Jan 31, 2025
Posts
1
Reaction score
1
I have an 08 Tahoe, new to me about 2 months ago. The serpentine belt is squeeking and I can't figure out how to stop it. I have changed the alternator, idler pully, tentioner, tensioner pully, and belt. Still driving me crazy
 

jfoj

Full Access Member
Joined
Aug 9, 2012
Posts
235
Reaction score
147
My 2005 has a squeaking A/C clutch bearing. As I tell people, I have a tweety bird under the hood!

As mentioned, put the A/C belt and see what happens.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
20,061
Reaction score
27,283
Location
Treasure Coast, Florida
I have an 08 Tahoe, new to me about 2 months ago. The serpentine belt is squeeking and I can't figure out how to stop it. I have changed the alternator, idler pully, tentioner, tensioner pully, and belt. Still driving me crazy
It's time to take a mechanic's stethoscope or long extension to isolate this sound. If you have long hair, get it out of the way. Stick one end in your ear and touch the various parts to isolate the source of the sound. Be careful.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,688
Reaction score
10,603
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

You are already receiving sage advice from the knowledgeable folks on this Forum.
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,325
Reaction score
8,371
Location
NE. FL.
You said you have only had it about 2 months. Do you have any maintenance records?

It is also possible that the power steering pump pulley is slightly out of alignment which will cause the belt to squeak.

Stick a straight edge across the face of the various pulleys to see if there is any misalignment.
 

dyce51

TYF Newbie
Joined
Feb 5, 2024
Posts
19
Reaction score
36
I chased and chased a "squeak" on one of the accessories on cold start one time...ended up being the water pump...
 
Top