Gas cap hissing. Can’t barely pump gas.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,721
Reaction score
25,952
Location
Elev 5,280
Also my long term fuel trims are reading -10 and -12 in both banks. Am I running lean? Could the clogged lines or bad purge valve vent solenoid cause this

Running rich. The PCM is taking away fuel (negative trims) because it's being told there's too much fuel by the O2 sensors. A bad purge valve can cause this, among other things, as can fuel contamination in the oil.
 
OP
OP
iboughtatahoe23

iboughtatahoe23

Full Access Member
Joined
Feb 17, 2023
Posts
884
Reaction score
474
Yes, with the new canister and canister vent valve, purging in the described manor worked for me. A shop vac with the hose on the exhaust side might work as well. I applied air pressure for at least ten minutes until I saw no more charcoal coming out.
I tried doing that; blowing down the filler neck with a air compressor and the little slot above the filler neck, with the charcoal canister off nothing came out of the EVAP lines even when I set a slab of cardboard under it it looks like just some water came out a few drops
 

Forum statistics

Threads
133,674
Posts
1,889,236
Members
98,934
Latest member
clublub69
Top