Search results

  1. N

    Help: 1998 4x4 4L60E into 2001 Yukon

    I have a 1998 rebuilt 4l60e transmission and would like to install it into a friend's 2001 yukon. I believe the bell housing and torque converter are different between these years however will i be able to swap this transmission into the 2001 Yukon, assuming i re-use his bell housing and...
  2. N

    Overdrive

    In your "service engine soon" light on? Were the valves in the valve body checked for movement when the pan was off? Any black clutch material on the bottom of the pan?
  3. N

    1996 yukon transmission swap

    The input shaft diameters may be different between 1993-1997 and 1998+ so compare the input shafts between the two units. Otherwise the case internals, valve bodies and electronics are the same. You may just need to transition to a 98+ torque converter due to the different input shaft diameters...
  4. N

    Oil pressure gauge maxed out?

    These units are really easy to replace - i did mine in 15 min. Just get a sending unit socket, available at autozone for $8 to ensure you dont damage the the unit itself. 1. depressurize fuel system by removing fuel pump relay in the fuse box in the engine bay then starting the engine (engine...
  5. N

    Stock Oil Pump vs SLP Ported

    I have to replace my 2003 Tahoe's oil pump. Debating going with an SLP ported unit as they claim better oil flow,etc.. Tahoe is completely stock and has about 189k on it. Is the SLP worth the extra cost?
  6. N

    2005 Yukon Denali No Drive Gear?

    Is your check engine light on? Perhaps a transmission dtc code has been set? Issue Could be electrical or mechanical. I'm no expert but have do a valve body in my 2003 tahoe so been doing some research... Electrical: Shift solenoid(s) malfunctioning PCM (less likely) Mechanical: Bad 2-4 servo...
  7. N

    Odd Coolant Leak

    Could be the rear of the water pump or one of the two hoses that connect to the underside of the throttle body. Water pump can leak with the engine shut off if the gaskets are bad and/or the rear panel is leaking but the leak would be more of a very slow trickle. There is an O-ring seal in the...
  8. N

    Help

    Is it throwing any codes? How is idle when first started (smooth/choppy/too high or low)
  9. N

    What to upgrade at 160K?

    As mentioned above, clean the throttle body - i did this past weekend and it made a noticeable difference in my 03 Tahoe's performance. More pick up, throttle response, etc. I have about 189k on it. Keep an eye on your transmission's shifting - my valve body is starting to wear, causing...
  10. N

    More ticking noise questions

    Per a GM TSB, looks like an oil pump o-ring has to be replaced (ill prob just replace the pump) 2001-2003: Service Bulletin: Engine Knock or Lifter Noise Subject: Engine Knock or Lifter Noise (Replace O-Ring) Model and Year: 2001-2002 Chevrolet Camaro 2001-2003 Chevrolet Corvette 2001-2002...
  11. N

    More ticking noise questions

    Lifter Tap Thanks for the reply 02 Burb. I was afraid that it may be lifter(s). Short of pulling the head and replacing and/or rebuilding the offending lifters, what can i do to reduce the tap? I hear mixed things about motor flush products (some say they work, others don't like them) I will...
  12. N

    More ticking noise questions

    Hello all, long time reader but first time posting. I have a 2003 Tahoe z71 with about 189000 that I bought about 4 months ago. Truck runs great except for a ticking noise that i noticed about a week ago coming from the around the bottom half of the engine on the passenger side. I have...

Forum statistics

Threads
132,005
Posts
1,860,737
Members
96,407
Latest member
MAPSr01

Latest posts

Top