Search results

  1. NC_John

    Cluster Acting Strange in Cold

    Yeah, it otherwise acted completely normal. No MIL/CEL lit up and I havent done a scan yet. I'm not sure an electronics error would display a code until it started affecting other components. Thanks
  2. NC_John

    Cluster Acting Strange in Cold

    Yeah. I have a yard full of diesels at work and I've been busy all week keeping stuff happy, starting and running. This weather plays hell with everything. We're back to the 50's and 60's starting Monday. I'm selling the truck to a good friend and just want to make sure I am not selling him...
  3. NC_John

    Cluster Acting Strange in Cold

    Yesterday morning my gauge cluster went funny. All my gauges were reading way too high and didn't reset when I keyed off. See attached pic. This is with the truck idling with the transmission in park. I had to disconnect the battery for a second to rezero them. Then they were fine. 09...
  4. NC_John

    Cruise Control not working

    Months late but am just browsing around and saw this. Check/change your brake pedal switch. Its probably stuck, wore out, broken.... Cheap fix and you should be good again.
  5. NC_John

    Oil pressure ?

    It all depends on how it was maintained. We just had to rebuild a 6.0 here at the shop for low oil pressure. Thought the gauge was bad. Tested it with a mechanical gauge- read very low pressure. Tried two new oil pumps and it still wouldn't make oil pressure. Determined with a trusted GM...
  6. NC_John

    happiness is.... NEW factory carpet!

    The molded piece is the carpeted plastic cover that hides the second row seat brackets/mounts......
  7. NC_John

    happiness is.... NEW factory carpet!

    You have to gut the entire interior- remove the seats, the center console and all the trim panels. Is not difficult but a fair bit of work. Hard to say how much the hushmat helped. I need to do a side by side ride with one without it. I did notice more wind noise and a couple squeaks I...
  8. NC_John

    happiness is.... NEW factory carpet!

    Thanks. Hard to believe now its an 09. It's at the body shop right now getting a redo on a piss-poor door repair (deer strike from previous owner), the front bumper fixed (guess the PO never saw a curb she didn't like) and all the scratches/scuffs removed. If I'm happy with how the body...
  9. NC_John

    happiness is.... NEW factory carpet!

    Finished! Got the bus finished up on Saturday. I put hushmat over the entire floor: Then started putting the freshly detailed interior back together. The new carpet fit exactly like it was supposed to - all the details were dead on. No trimming, no cutting, no messing around at all...
  10. NC_John

    happiness is.... NEW factory carpet!

    List is $223.69 and $323.45 for the two sections (there is a seam under the second row) but I would imagine its a little cheaper for a Tahoe. I got both for under $400 (wife gets discount at work- pretty much the same pricing as the online GM Part vendors but I don't have to deal with...
  11. NC_John

    seat backs keep falling...

    I'm up the 85 from you in Rockwell (south of Salisbury on 52). I'll see how the new one coming in looks and then see how I might want to fix the second. The map pockets are pretty mickey mouse. If they ever get used they pretty much come apart.
  12. NC_John

    seat backs keep falling...

    LOL...with mine being an 09 I am probably Sh*t-Out-Of-Luck and therefore no "I care" post. ---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ---------- I think so. I'll let you know when they come in. I might fix the one with the good vinyl pocket with epoxy...
  13. NC_John

    happiness is.... NEW factory carpet!

    Got my new carpet from the dealer today (got for about what aftermarket was going to cost). It is 100% original- no trimming, molded perfectly, everything like the one that came out- except this one is all new and clean and all. The only problem is they can't get that molded piece that fits...
  14. NC_John

    seat backs keep falling...

    "Scott Clark here again..." Yeah. No sh*t. Get off my TV because I am tired of looking at you. Sheesh... At least Amy Rogers is nice to look at.... ---------- Post added at 02:29 PM ---------- Previous post was at 02:22 PM ---------- UPDATE.... Took the seat back off to see what's...
  15. NC_John

    seat backs keep falling...

    Oh yeah? Well I worked out of Sumter for a couple years (worked for Thompson Industrial)..... How's that for small world? :beer: (I bought a new suburban from City Chevrolet in Charlotte back in 2001 but didn't keep it long enough to ever get service from them)
  16. NC_John

    seat backs keep falling...

    It might come to that. Let me take another look at it and see if I can figure it out....
  17. NC_John

    seat backs keep falling...

    I wish I could figure it out! I've looked and looked and can't see what I am missing. Maybe I'll just drive down 85 to Charlotte and let you fix the damn things for me!!! I hate being outsmarted by a seat. ---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM...
  18. NC_John

    seat backs keep falling...

    no sir- factory.... And the clips on the backs are heavy plastic- no give at all......
  19. NC_John

    seat backs keep falling...

    I've had mine right off to inspect and can't find anything broken or obviously missing. Both sides are doing it which is weird. I'll have to look at the parts drawings but with the seat assembled its hard to tell if something is missing. I need to look at another immediately adjacent to...
  20. NC_John

    Sound Deadener - how much?

    OK. Got the burb gutted, new carpet is on the way. Now is the time for me to put some sound deadener on the floor and quarters with everything removed. I found a hushmat kit that has 30 sheets (58 sq ft). Is that enough to get the floor and maybe some of the quarters? I should have...
  21. NC_John

    seat backs keep falling...

    Have I got the only truck that is doing this (seat backs sliding down)?
  22. NC_John

    StockInteriors.com?

    Great news... I can get factory replacement carpet right from GM (my wife's price, with her discount, is about the same as the aftermarket I looked at). It is shipping from Lansing, MI and I should see it late this week. I'll check out frost king. Thanks!
  23. NC_John

    StockInteriors.com?

    OK, thanks. I'm real leery about it not looking 100% factory- I read different reviews about their stuff. Here's where I am at right now. I have a couple big piles of interior parts (this is one of them): and a gutted bus waiting for my next move: The carpet cleaning...
  24. NC_John

    StockInteriors.com?

    Anybody know anything or have any experience with these guys? I'm considering replacing the carpet in our newly acquired burb rather than just trying to clean it (I have to basically gut the truck anyway). I can't get carpet from the dealer, are these guys any good? I don't want it to look...
  25. NC_John

    seat backs keep falling...

    I'm in VA and the truck is in NC so I can't get a pic right now but its the entire hard plastic section on the back of the front buckets. The elastic pockets are part of it. Both sides keep sliding down like they are worn but I took one off and its just clipped on so I can't see what would be...

Forum statistics

Threads
132,049
Posts
1,861,579
Members
96,502
Latest member
mfracchia

Latest posts

Top