Search results

  1. W

    L8t 427 Whipple charged Denali

    Sorry for such the long delay in the build. With my 3 girls, summer heat, and work I haven’t had time to touch it much. I still do have it and the whipple finally came in. However I haven’t even opened the box up yet. I promise you guys by the end of the year she’ll be up and going strong.
  2. W

    L8t 427 Whipple charged Denali

    I really wish he would have but nope lol. I got off the plan from Disney, hopped in my work truck, and headed out to midland. I did get word from Whipple that they are way behind on production and might have it shipped out by the 16th. At the end of the day it’s all good and will give me time to...
  3. W

    L8t 427 Whipple charged Denali

    Got the front end put together today. The Viking coil kit from twisted metal fab was very well built and super easy to install. The wilwood kit went in pretty easy also. Lastly the djm lower control arms are a nice piece and straightened out the angles nicely. When I’m home next time we are...
  4. W

    L8t 427 Whipple charged Denali

    Mishimoto. I’ve used them in all sorts of vehicles including my zl1 and haven’t really had an issue but their customer service is top notch.
  5. W

    L8t 427 Whipple charged Denali

    Made some pretty good progress the last few days when I can find the time to get out to the shop. Got my headers all wrapped up, Morimoto headlights/tail lights installed, radiator put back in, and finally got around to making my 6 an trans cooler lines. Tomorrow I plan on digging into the front...
  6. W

    L8t 427 Whipple charged Denali

    Alright so Ted got back to me this morning about the fuel pressure sensor and wiring. He said, at least in my application, no rewiring is needed and the 3 pin sensor is fine.
  7. W

    L8t 427 Whipple charged Denali

    I appreciate it. I’ll make a call to jannety racing tomorrow and talk to Ted and see what I can figure out. Spdc has a YouTube video out that’s a couple years old explain the sensor. I guess from 14-16 it was a 3 pin analog sensor and 17 and up was a 4 pin digital. Thankfully it won’t be super...
  8. W

    L8t 427 Whipple charged Denali

    Do you happen to have the part number for that sensor?
  9. W

    L8t 427 Whipple charged Denali

    So l8t used a new engine and wiring harness. I reused my l86 harness. For 19-24 they changed the high side wiring. Before that it’s the same connector.
  10. W

    L8t 427 Whipple charged Denali

    To my understanding for anything below 2019 that’s not needed. I could be wrong though. I’ll for sure look into it
  11. W

    L8t 427 Whipple charged Denali

    Alright I made it back home and knocked out quite a bit today. Got the trans back in and the torque converter bolted up and torqued. Drive shaft slide right in and is so much smaller around than the stock unit. This will be nice when I get it sitting lower so clearance. Also started getting the...
  12. W

    L8t 427 Whipple charged Denali

    Even though I’m stuck at work I figured I should do a quick run down of the build over all. Thompson Motorsports l8t 427 short block Callie’s compstar rods/pistons/crank Ati dampener LME vvt delete LME valley cover LT4 hpfp FIC 30% over LT4 injectors Atomic drop in low side 475 pump...
  13. W

    L8t 427 Whipple charged Denali

    Man I’m so sorry. I had to head back to work early and will be back home next week. That being said I did get the block slung in and started working on the wiring harness. As for the exhaust I have a set of 1 7/8 kooks long tubes I need to wrap and get put on also. I got ahold of Whipple the...
  14. W

    L8t 427 Whipple charged Denali

    Finally back from work and had an hour or two free to get some stuff taken care of. I ended up pinning the crank just to be safe with the whipple. All pushrods have been put in a the preload set for the Johnson racing tie bar lifters. Tomorrow or the next day I’ll end up finishing up with the...
  15. W

    L8t 427 Whipple charged Denali

    The magnuson is awesome for sure. I ended up going with the whipple because it was on sale. I saved a good chunk of change on it.
  16. W

    L8t 427 Whipple charged Denali

    That’s kinda my thinking also working out of town and having the wife daily it. Trying to keep the down low drivability as tame as possible and not overly complicated.
  17. W

    L8t 427 Whipple charged Denali

    I was heavily considering xdi however they are backordered like crazy and the tuner I use often isn’t a fan of their support. I was thinking of port injection but I think the 30% overs will be fine for what I have going on
  18. W

    L8t 427 Whipple charged Denali

    Also it’s a 2016
  19. W

    L8t 427 Whipple charged Denali

    It’s an 8l90. I went with a 3k triple disc setup from circle d. The rotation assembly is all cali compstar stuff. Heads are a set of katech cnc ported stock casting heads. With the 59cc chamber it’ll be right at 10.8:1 so it should have some good grunt down low.
  20. W

    L8t 427 Whipple charged Denali

    Fic lt4 30 over on the high side walbro 525 on the low side. Gpi cam has a 32 over fuel lobe and then a lt4 high side pump. Unfortunately there is no E85 close to me at all and with this being a daily driver driving 45 minutes to fill up isnt in the picture. It’ll be tuned on 91 pump gas. I’m...
  21. W

    L8t 427 Whipple charged Denali

    Quick update before I get the heads back on. Got the pushrods measured out all within 7.95 to 7.97 with the Johnson tie bar lifters. Still waiting on the c5r timing chain to come in from Katech. Ended up ditching vvt all together and went with the LME set up. For the money this piece is mint...
  22. W

    L8t 427 Whipple charged Denali

    Quick update. I reached out to gulf coast driveline and ended up scoring a 4 inch t8 driveshaft that will hold well over 1000hp. For anyone wondering a 2wd shaft on a swb is 56 inches center to center without the yoke.
  23. W

    L8t 427 Whipple charged Denali

    I was going to reach out to them on Monday and see what they might have to offer
  24. W

    L8t 427 Whipple charged Denali

    I’ll try my best. I work out of town a lot and am hoping to have my short block up on the stand next week to get pushrod lengths and what not.
  25. W

    L8t 427 Whipple charged Denali

    So I’m in the middle of swapping my tired l86 out with a l8t stroker with a gen 5 whipple on top with all the supporting mods. Trans was built by tkr to hold 1000hp with a circle d billet converter. The issue that I am running into is a good choice for a drive shaft. Seeing that it’s 65 inches...

Forum statistics

Threads
132,070
Posts
1,861,880
Members
96,534
Latest member
jack004

Latest posts

Top