Search results

  1. P

    Autoride Compressor

    Ok, upon further inspection, I can see the compressor was replaced the same time as the shocks with the unit from Arnott. It does come on for a couple seconds upon start-up. The shocks and lines are definately holding air. I noticed what looks like a purge valve on both sides of the truck. Could...
  2. P

    Autoride Compressor

    It looks like the previous owner replaced the shocks with the ones from Arnott back in November last year, but didn't replace the compressor. I'm thinking they had leaking shocks, so they replaced them. Which left a compressor that was overworked for who knows how long, and has now gone out...
  3. P

    Autoride Compressor

    I'm pretty sure my compressor is out, it doesn't come on at start up anymore, or at anytime, and the "service ride control" is on my dash. The shocks or lines don't seem to be leaking. I've never heard any air coming out, and they seem to have plenty of air in them now. They were also leak...
  4. P

    Best oil for 100K + engines?

    I have always run Mobil 1 synthetic in all my rides. For those of you who have an Escalade or Denali, pay close attention to the manufacturer guidelines in the owners manual. They recomend 5w30 in all cases. If 5W30 is not availible 10w30 can be used, but is not recomended. I'm not 100% sure...
  5. P

    Programming Key Fob

    I recently picked up a '03 Yukon Denali, the driver #1 remote is being recognized as a driver#3 remote. Can I fix this by reprogramming the fob, or do I have to take it to the dealer? I only have the 2 remotes for the truck and the other is being recognized correctly as driver #2.
  6. P

    someone talk me out of it.......

    Around my house, when somethings broke we fix it.:) Doesn't matter if its old or new, sooner or later they all need something fixed.
  7. P

    Help DOA!

    Glad it all worked out for you. I think the broken heater hose coupler is some kind of right of passage for Tahoe/Yukon/Esky owners.:)
  8. P

    Long Tube v Short Tube Headers

    This is right on. I've LT's on my 94 camaro also, and the key difference is in the upper end of the RPM range. You'll probably lose some low end torque with the LT's but you'll gain a broader and smoother power and torque curve and gain a few ponies and torque#s in the process.
  9. P

    Stock radio wanted

    www.replacementradios.com
  10. P

    Bridgestone Dueler Revo 2's

    I've got the Revo 2's on my 99' Tahoe, and they are awesome.:) Good ride, low noise, traction that doesn't quit, and decent wear. One of the best on-road, mild off-road tire out there.
  11. P

    Driver's side door handle

    Door module is not too bad to remove. Here's how to do it once the door panel is off: 1. Make sure window is completely rolled down. 2. Remove all the screws around the door module, including the large one in the lower right corner. 3. Remove wiring from around module and the door...
  12. P

    The evil Waterleak!

    Put silicone on the screws that hold the cowl pieces in.
  13. P

    Fixing my 'Hoe

    Didn't get any pics, but I'll post some up soon. Truck rides a lot better. I'm sure most here know this, changing the sway bar endlinks is a PITA. Sunlit what do you mean???
  14. P

    Fixing my 'Hoe

    I'm almost done fixing up my 'hoe.... Just put new bilsteins on it today, fender flares, new sway bar end links, replaced the headlights and bulbs with silverstar ultras, and put a new rebuilt factory radio in. Just a couple things to button up tommorow, I'll post pics tommorow of what she...
  15. P

    turn signal help!!!

    If you have the circut board style, try cleaning out the bulb sockets with eletrical contact cleaner, then grease the bulb contacts with electrical grease. If that doesn't work I'd say you need a new bulb circut board.
  16. P

    Driver's side door handle

    You don't have to pull the handles to replace the lock cylinders. You just have to remove the inside door panel and the door module. The cylinders are held into the handles by a metal push tab. If you visit a GM dealer parts dept. and give them your VIN they should be able to get you lock...
  17. P

    Need Shocks For 2-3" Lift

    Just bought Bilstiens for my truck, although mines stock height. I still have the stock Bilstiens on the truck and the trucks been getting a little bouncy. I hope the new ones ride as good as everybody says. Got them from Summit for $300 for all four.
  18. P

    Driver's side door handle

    Right side outer handle 15742230 Left side outer handle 15742229 Inside handle #s depend on the trim color. Also it's not only fitament but the texture of the outer handles and the quality of the casting.
  19. P

    Driver's side door handle

    If either of you need any advice on either, let me know, I've done inner and outer door handles. One thing I would recommend is using only a gm door handle. Reason is because aftermarket ones don't seem to have the just the right fitament.
  20. P

    TYC Headlights

    They're ordered thanks guys:)
  21. P

    TYC Headlights

    For those of you that have the TYC lights, where did you get them? TYC's website doesn't allow purchasing. It says they are in the process of lowering their prices and to send a quote request, I did that a couple weeks ago but didn't hear anything back from them. There's also no phone # on...
  22. P

    00 Denali - OEM Security System wont let my truck start sometimes.

    It sounds like you may have an issue with the ignition cylinder or a worn out key. The key or ignition may not be getting a good contact, which sends the proper signal from the key to the pcm. Happens quite a bit with gm vehicles equipped with the pass-key systems.
  23. P

    OBS Blazer on Trucks

    Was a good episode and a cool truck. It's funny how low they show all the costs at.... considering they are using top of the line tools, welders, ect, stuff that not everybody has in their shop. Unless you have full shop there is no way your doing a double axle swap for $1400.:)
  24. P

    Driver's side door handle

    You don't have to remove the door module, but it gives you more room to work if you do. The handles are kind of a pain in the ass to get everything lined up though. Make sure you get a GM handle, because aftermarket ones fit like crap, I found this out the hard way. I've replaced mine twice...
  25. P

    Radio Lights out? Check this out!

    Found this www.replacementradios.com So if you want to keep your factory radio, or get it fixed so all the lights work check it out. Looks like $40 plus shipping to fix it or $140 and shipping is free for a replacement radio.:)

Forum statistics

Threads
132,182
Posts
1,863,618
Members
96,695
Latest member
WildHusker

Latest posts

Top