Search results

  1. Oh Kee Pah

    6 inch lift with 35s finally got installed

    Take a look at TIE ROD SLEEVES! I've got them installed and was able to notice a difference immediately. The power on the steer came back with these. They will work with your BDS 6" lift because that kit uses tie rod extended ends added to the oe tie rod. This sleeve goes over the OE tie rod...
  2. Oh Kee Pah

    Struts or Coil Overs Stock or +2 on 6" Lift

    The front suspension of our 2015-2020 1500 SUVs are the same as the 2014-2018 Silverado trucks. For sure do a Magneride delete so you don't have to deal with service messages, etc. So, since they are the same front end, pretty much any level/lift to the front that fits that model year Silverado...
  3. Oh Kee Pah

    Struts or Coil Overs Stock or +2 on 6" Lift

    If you're going with the 6" RC lift, then I would take a look at their Vertex 2.5 Adj. Coilovers with dampening control. https://www.roughcountry.com/product/gm-vertex-coilovers-689001 From my experience, front coilovers are terrific; always kicking myself for not throwing down more $ and...
  4. Oh Kee Pah

    Rear coil spring choice

    Take a look at the z71 trim rear coil spring. Going from the PPV to the z71 should be the 1" or so ride height difference you're looking for. I swapped my OE magneride rear coils for z71 rear coils when I initially leveled my 2015 LTZ. GM part#23154236...
  5. Oh Kee Pah

    6" Lift Kit Wheel Question

    Here's what I came up with through the RC website, using the 6" lift for a 2015-2020 GM SUV 4wd. Please note that I've selected a 20" wheel at 9" width. This is not my strong suite, but I don't think wheel spacers will help get you to the 0/+1 offset. I think new wheels might be required. My...
  6. Oh Kee Pah

    A/T Tire selection for 2022 AT4 on 20" wheels

    If you're not taking the AT4 on any off-road terrain, and not hauling anything significant, than yes, the "passenger" rated tire will be just fine. You don't really need the LT (load E) tires if you're only running pavement. If you go with the 285/55R20 (114T) then you'll get that aggressive...
  7. Oh Kee Pah

    Show off your 2015+ leveled Tahoes and Yukons!

    Happy Trails - Another ME Fall almost in the books...
  8. Oh Kee Pah

    Z71 Adventure Wagon

    @BlackBrud -> I was back home in 5280 for the 4th of July and told my mother that those new CO blackout plates looked pretty great. Told her that it would be perfect on my Tahoe. WELL DONE, again. I think the black plates really lets the front of the rig shine. Anything new? Fall trips?
  9. Oh Kee Pah

    Experience with Dobinsons rear coils?

    @DesertRat - any word on those Dobinson rear coils? Did you end up buying those or going a different route? Thanks!
  10. Oh Kee Pah

    Front Springs

    In the glove box is RPO code sticker. Do you see any of the following codes?: 6wu, 7d8, 7fq ,7fw If so, look at GM part#22826290 If you do NOT see those codes; I would suggest GM part#22826289 If you are looking at the different front coil options, you will notice that a few are considerably...
  11. Oh Kee Pah

    Show off your 2015+ leveled Tahoes and Yukons!

    @z71wagon - Ride looks pretty good as is, IMO. I'm currently running 295/70/18s on OE wheels. That's with a 4" lift. I completely agree with @gtrslngrchris that going too large with the tire will eat into your performance. I honestly think a wider 33" tire would suit your setup, but I don't...
  12. Oh Kee Pah

    Big Red Hoe got lifted!

    @rick1024 - job well done! I think, since you're running the 20s, you don't need the front wheel spacer. Just gotta make sure you're not rubbing on the inner tie rod, that seems to be the culprit but mostly with 18s and a 4-6" lift...
  13. Oh Kee Pah

    1" or 1.5" Front Level 2017 Yukon Denali

    Darn! Leaking shocks so quickly?! I would suggest sending to Fox's service dept. You can contact them directly and they will walk you through getting your Fox shocks fixed up. However, I do understand the problem that this is the daily driver. I do think that the Bilstein setup you mentioned...
  14. Oh Kee Pah

    Suspension/chip tuning/milage programing advice please

    I actually just saw a Facebook post from Xineeering (MRC delete/ShockSims.com) that I snapped a photo of...it was a recommendation for scan tool WITH ride height trim procedure. May be worth checking out: Safe Travels!
  15. Oh Kee Pah

    Roof rack and skid plates design , who's in ?

    @Polo Job well done! Looks great, IMO. Have you done anything in terms of underside armor/protection? I would certainly be interested in those too. Wider fender flares, absolutely! What kind of $ amounts are you talking when you say, "expensive?"..
  16. Oh Kee Pah

    What wheels specs and tire size?

    Are you keeping the OE UCAs or going with a new set?
  17. Oh Kee Pah

    Show off your 2015+ leveled Tahoes and Yukons!

    @snives - New UCAs? Did you have to do any trimming or are you experiencing any wheel rub? Did you happen to measure "realized" ride height increase vs. the stated "2.5in Eibach lift" with coils? Eibach part#? Wheel specs? Looking good!
  18. Oh Kee Pah

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    Did I miss it? What running boards are these!?! Manufacturer and model name would be much appreciated - would like to research these. Or are they custom made?
  19. Oh Kee Pah

    Hardwood trim swap

    @RST Dana - Thanks for noticing - I like the bowties on the headrests I noticed several of the "higher end" vehicles with custom embossed headrests. The Chevy SS has a good example. Or a Black Widow lifted vehicle from SCA Performance; they really do a nice interior redo. Anyways, thought I...
  20. Oh Kee Pah

    Hardwood trim swap

    I have my interior faux wood wrapped in 3M 1080 vinyl...
  21. Oh Kee Pah

    Any tips on bug and road tar/gunk remover?

    I've found that the Chemical Guys have pretty darn good products... That said, I don't think anything will beat a good ol' CLAY BAR. Clay bar LUBE is a must; don't ruin your paint while you're trying to clean it up! Get a good can of elbow grease too. With the clay bar, give your lower door...
  22. Oh Kee Pah

    Z71 Adventure Wagon

    Lookin' GREAT! I bet you're liking the tune a lot and now with the Corsa...oh man! What would you say the temps got down to when you had it up in Summit Co. sitting overnight? I'm going back and forth about the transmission mod; worried it might not be too happy on some Maine winter mornings...
  23. Oh Kee Pah

    Sway bar link broke… dang it.

    @Fifty - you're right. Been a while, but went back and checked and my BDS kit DID come with new front links. So I guess not OE length. But @Trey Hardy is on the right track with the Kryptonite products for sure...
  24. Oh Kee Pah

    Sway bar link broke… dang it.

    Late to the party, but... Take a look at Cognito's HD Front Sway Bar links: https://cognitomotorsports.com/cognito-heavy-duty-front-sway-bar-end-link-kit-for-01-19-silverado-sierra-2500-3500-2wd-4wd.html From the advice of another here on TYForum, I've been running these for about 5000 miles...
  25. Oh Kee Pah

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    @CMoore711 @Hattie2879 +1 regarding the LED fog light bulb upgrade! It's been several years now since install, but changing the fog bulbs was probably just about the best, quick, smart, useful, inexpensive mods I've done. Pretty easy install on my own. Did I mention inexpensive? I run my...

Forum statistics

Threads
132,301
Posts
1,865,648
Members
96,885
Latest member
BinOdhaib

Latest posts

Top