More updates! I’m very close to being finished with my first phase of maintenance and upgrades.
Last week my corsa exhaust delivered, as well as a set of ac delco spark plugs and wires, and some new LED headlight bulbs.
Over the weekend I installed the catback, the headlight bulbs, and changed the plugs + wires.
The headlights went in easily.
The spark plugs were pretty easy as well, with the exception of the one closest to the firewall on the passenger side. I ended up going for that one from below - it definitely took more time but it wasn’t too bad. Almost all of the plugs looked good - the last plugs closest to the firewall had some oil on the threads, but from what I’ve read and what I could see - it looks like the valve cover was leaking a really small amount. I inspected the area around those plugs and saw a small amount of oil near the valve covers, but I had to really search for it.
The catback install was easy - the only hiccup was that I needed to cut the portion that goes over the rear axle in order to remove the stock exhaust.
Man - those three mods made such a difference! The headlights are finally useful, the engine idles and revs really smoothly, and the exhaust sounds great!
For now, I’m going to relax a bit on modifications. The next one on my list is a set of fox 2.0s - I’m going to wait until late spring or so to get those since I’ll probably have the bushings and wear items in whole front end refreshed at that point as well. I’ve got a bit of saving to do.
Aside from that, the only other things I have planned are another drain and fill for the transmission, and doing some LED fog light bulbs.
I’ll upload the rest of the pictures in another post since they’re large.
Happy Friday, y’all!