Search results

  1. 0

    Where to get electric fans for conversion?

    Went to the salvage yard for $100. Cleaned them up and look and work great!
  2. 0

    High mount brake light question

    I went to get a state inspection and they failed it on third brake light as well as a inner tie rod. I went out to the truck and the brake light works fine. I like to think the dealer techs aren't paying attention but it sounds like its an intermittent problem. Every time I check it, its...
  3. 0

    Decide on Denali Headlight

    I've read all about Depo headlights and they sound like the best aftermarket but the lowest price I can find is a little over $300. I'm just trying to save a little bit of cash. I will probably do HID eventually but its not in the cards right away.
  4. 0

    ? re Gatorback Serpentine belt ...

    I used the stock size after switching pulleys. No problems
  5. 0

    Decide on Denali Headlight

    I need some help making a decision on Denali headlights. I can get used OEM in great condition for $200 or go new aftermarket with headlightsdepot.com for $230. I'm leaning toward the new ones but has anyone used headlight depot before? Thanks for the help!
  6. 0

    Stock Upgrade Tires

    I just bought new tires all around. Just under $150 a piece if I remember correctly. BF Goodrich Long Trail T/A. I think they are great. Quiet and smooth. I don't have experience with Michelin or Goodyears but they are cheap and a decent brand. I drove in a snowstorm we had back in October...
  7. 0

    Windshield Washer Reservoir Leaks, Ugh!!

    Did you get a chance to check where the leak is actually coming from? I had a large leak coming from the washer resevoir when I first bought my Yukon and it was NOT the tank. I had to replace both washer fluid pumps (front and rear) The housings develop cracks. They are something like $20-30...
  8. 0

    Reduced Engine power, Check Engine.. and other errors...

    I had this happen to me a few times back in June/July 2010 when I first bought the truck. It happened about 3-4 times all within a month and was start to p*$$ me off. I ordered a new APP sensor for the pedal and was going to replace it if it happened again and it hasn't done it for over a...
  9. 0

    How to install E-Fans

    Totally misread your post. My Bad
  10. 0

    How to install E-Fans

    So how the hell you end up with a $40 fan? Come on share your secret
  11. 0

    How to install E-Fans

    $40 really? What brand? I have no idea how many miles. Are there more on amazon?
  12. 0

    How to install E-Fans

    I picked up an electric fan set up at a local scrap yard. Its off a 2006 Yukon. I know I could have gone with a set on rock Auto but I wanted to save a bit. I paid $100. Is that a reasonable price?
  13. 0

    Speedometer troubles

    sounds like the stepper motor went on it. I had the same happen. Had to send it out. Lots of places will do it for under 100 bucks
  14. 0

    2 weird issues: 1. Clicking when AC is on, and 2. humming sound from brakes

    For #2 I think I know what you mean because it happens to me almost every morning. When you take the truck out of park, the transmission causes it to lurch forward. This is especially true in the morning when the truck first starts because its cool out and the idle is kinda high. When you...
  15. 0

    AC button is confused

    This one is easy and confused me too. Look closely when the AC (snowflake) light comes on the LCD display. There is a line through it. The AC comes on depending on the temperature you select or even if you need the defroster. Everything is automatic. When you press the AC button, you are...
  16. 0

    2001 Tahoe Rough Idle/Skip After New Plugs and Wires

    Perhaps one of the wires was arcing over to the heat sheild and when removed it no longer does it. Or...you never had one of the boots fully pressed on to the end of the plug and when you removed all the boots to take the shields off, you reconnected all boots fully. I would keep an eye on the...
  17. 0

    2 weird issues: 1. Clicking when AC is on, and 2. humming sound from brakes

    For #1, I have the same problem. I have narrowed it down to a problem with the actuator for the blend door that directs air flow to the defroster, floor or dash vents. Try pushing the button on the hvac controls so you direct the A/C to the floor. The noise will most likely go away. As for...
  18. 0

    Help with Diagnosing DTC P1125

    I don't remember its been a while since I had the CEL come on.
  19. 0

    Help with Diagnosing DTC P1125

    I bought my 2003 Yukon about a year and a half ago and within a month of owning it I started getting Reduced Engine Power on the DIC and a check engine light would come on. I found out the code was P1125 "APP (Accelerator Pedal Position) does not match TPS (Throttle Pedal Position". This...
  20. 0

    BCM rear access ajar

    There is a number on a white sticker on the case for the BCM. As long as the BCM matches the number for the BCM on ebay then you are OK. I agree that more likely than not the chip will probably be the culprit and at that point you will be replacing the BCM anyway. As part of my experience I...
  21. 0

    BCM rear access ajar

    I'm glad you were able to diagnose where the problem actually lies. I would agree that the BCM is the problem. The only thing I would be nervous about is having the dealer re-flash the BCM. The BCM more than likely has a hardware problem or short across the copper trace in the circuit board...
  22. 0

    BCM rear access ajar

    Yes I tried the BCM I purchased first just to see what would happen but all the security lights came on and the truck wouldn't start. It cranked but did not start. I put my old BCM in and the truck started right up. This is what brought me into the dealer. However, I remember reading...
  23. 0

    BCM rear access ajar

    Sounds like a BCM problem to me. You could take a chance and have the dealer re-flash the BCM and pay 1 hour of labor (approx $90) or buy a new BCM and still pay the dealer to reflash. Just to make sure, though, have you tried probing the wires at the bcm when you open and close the...
  24. 0

    BCM rear access ajar

    Ya don't pull the door apart. Just unplug connector C6 under the steering column. It is the only harness plugged in the the BCM on the rear side of the BCM. I am pretty sure it is purple. The right rear door is the light green/black wire. Put the positive probe of a multimeter on the...
  25. 0

    BCM rear access ajar

    When you pull the connector/harness from the BCM (I think its called C6 and is purple) that contains all the wiring from each door's latching mechanism, you do not get warnings about all the doors being ajar. When you pull the connector, this creates an open circuit. Also, I put an ohmeter to...

Forum statistics

Threads
132,324
Posts
1,866,005
Members
96,922
Latest member
SilvermaneWJz

Latest posts

Top