Search results

  1. W

    2005 Denali CD Player Replacement Cubby?

    ^ X2 I'm using the same kit
  2. W

    My Build Thread

    Thanks man. I really like it. And i can't wait until spring, I'm ready to put the 24's back ok What do you mean, do the tail lights?
  3. W

    My Build Thread

    Been a while since I posted. Had a ton of stuff going on over the past months and a bunch of problems with my Denali. Fosscore to answer your question about fender height. The rear is 31.5" and i had the front down to 29" but raised it up back to 31" if I'm not mistaken. Here is some...
  4. W

    2003 Denli No Start

    Yes I have done that. Even tried to manually move the selector switch and had no luck. Decided to have it towed to a transmission shop today.
  5. W

    2003 Denli No Start

    Soon as I turn the key on, the display on the cluster goes straight into Reverse. And I'd doesn't matter what gear you select the display still says reverse. So the computer won't allow it to start because it thinks it's in gear.
  6. W

    2003 Denli No Start

    Yes.
  7. W

    2003 Denli No Start

    Anyone?
  8. W

    2003 Denli No Start

    I should add that when you turn the key on everything else works. All the dash lights come on, radio, hvac, and everything that should. You can hear the fuel pump cycle. When you turn the key the dash just turns off and nothing. The engine doesn't even try to turn over. But going from the key...
  9. W

    Digital Dash Solutions eBay

    Digital dash solutions did my dash. Great company to deal with.
  10. W

    2003 Denli No Start

    2003 Yukon Denali XL. Back story: drove fine yesterday and when I went to park it and noticed that the cluster said it was in reverse and the reverse lights were on. Didn't think anything about it and shut it off. Went back later to start it and nothing. The cluster is showing reverse but the...
  11. W

    Transmission problem?

    I read that link about converters and symtom wise its exactly what ive got going on. So I just took the truck out and got it up to temperature, turned tow haul off and at 40mph it started chattering/shudder. Feels like your driving on an extremely rough road. But I touched the brake pedal and...
  12. W

    Transmission problem?

    I got to drive the other vehicle prior to getting the transmission out of it and it was fine. I did have someone help me swap the transmission out of my denali. So I guess there is a possibility that the ood converter could have gotten used because the replacement I got wasnt marked. My luck...
  13. W

    Transmission problem?

    Sorry I left that out. But yes I changed the converter out.
  14. W

    Transmission problem?

    To start off the vehicle is a 2003 Yukon Denali XL with 230k miles. So back in the spring I began to have transmission trouble. Originally it started as a chatter or shudder around 40mph during normal driving/accelerating. It did it for a few months and then the transmission started slipping...
  15. W

    question for those who are lowered

    Thanks for the info guys. I had a turndown installed prior to lowering, I'm glad to know that I can have the exhaust run out the back now.
  16. W

    Denali Bumper Lightbar Install

    I like it. :waytogo:
  17. W

    question for those who are lowered

    For the guys running the 5/6 rear drop, what are you doing for the exhaust? Is there room to get it over the axle or do you have to dump it before?
  18. W

    Escalade gauge cluster upgrade? This one?

    I have a custom cluster from digital dash solutions. Great product and company.
  19. W

    My Build Thread

    Thanks man, i am really pleased with the stance. I'm'm not sure what it's measuring yet. It started raining on me while I was taking these pictures, but I plan to measure it as soon as I get done with the alignment.
  20. W

    My Build Thread

    I did pick up a set of led tail lights and a set led reverse lights. I did get my 3/6 drop installed along with all new steering components. I still have to fix the torsion key and get an alignment and a few small things before I can drive it again. It's been down since July.
  21. W

    My Build Thread

    Been a while since I updated. Well I had had problems with my factory stereo and in a previous post installed that Pioneer double din. That didn't fix my problems, the D pillars had these tweeters smashed into the cones and wedged in behind the plastic panel. The wires were halfway twisted on...
  22. W

    issue with my suspension

    Well turns out that the torsion key was one slot to far on the passenger side. I didn't even think it was possible to do that.
  23. W

    issue with my suspension

    2003 GMC Yukon Denali XL. I purchased the 3/6 drop from tony and started to install it this past weekend but had to leave before I really even got started. Came back today to work on it and the front had already been swapped out for me. The truck didn't sit near as low in the the front, only 1.5...
  24. W

    Denali Molding Removal

    Thanks for the fast reply guys!
  25. W

    Denali Molding Removal

    I have searched with no luck. But what exactly holds on the door/fender moldings on my 2003 Yukon Denali? I saw some fasteners in the wheel well but I didn't know if it's held on with tape or if there are any clips behind them. Any and all information would be appreciated.

Forum statistics

Threads
132,333
Posts
1,866,251
Members
96,958
Latest member
24redDenali

Latest posts

Top