Search results

  1. Keanen55

    12.3" Full Digital Cluster for 2021's - GAMMA Tester Wanted!

    I'm game for testing if thats still open. I'm in Houston
  2. Keanen55

    Anyone replaced the factory Bose sub in its plastic box with aftermarket sub and or used an aftermarket amp with the Bose sub?

    Yes, the seats have to come out. I went with the MTX box with built-in amp. I believe that they have been discontinued but it upgraded the small 5.25 to a 10". Much better sound for sure!
  3. Keanen55

    Aftermarket Radio Wiring without a diagram for 2013 Denali with Bose

    I bought the Phoenix radio and it was all plug and play. I don't have the bose system in my truck so I'm not much help with that unfortunately. Good luck!
  4. Keanen55

    2500 series front end clunk

    Open the hood, have your wife step on and hold the brake petal and tap the gas and watch the engine for excessive play. I bet you that you driver's side motor mount is bad. I had the same thing happen to me last year. I changed everything out in the suspension and it was still making that...
  5. Keanen55

    2500 series front end clunk

    Motor mount possibly bad? They tend to go on the driver's side first!
  6. Keanen55

    Dashboard Lights

    Yes, that is what they are supposed to do! I'm sure that they are on when you're driving at night. You can adjust how bright they are by using the smaller knob next to the main light switch to the left. Press the small knob in and twist to adjust brightness. There's nothing wrong with your...
  7. Keanen55

    Full "neon" escalade third brake light

    That's odd. I've had 1 for over a year and no problems. Looks great at night! I'm in TX with 100 degree temps! Must be a bad unit! Sorry to hear that you're having issues!
  8. Keanen55

    Programming non dorman keyfobs

    I have a 2010 and also did it in my 2007 Yukon as well
  9. Keanen55

    Programming non dorman keyfobs

    This how I did mine, but my fobs were OEM
  10. Keanen55

    Aftermarket bluetooth suggestions?

    If you're happy with your headunit there are plug and play solutions out there to add bluetooth. I used this adapter in mine for a few year before I decided to fiberglass a tab in my dash. You do have to pull the radio out to plug into the back of it. Do no exposed wires and clean factory...
  11. Keanen55

    Caliper Covers

  12. Keanen55

    Caliper Covers

    Looks good, but I'd rather to rattle can mine. Put the $250 towards performance MODs!!
  13. Keanen55

    Frustrating Camber Issues

    I'm having the same issues. I'm thinking of going with the control arms to see if they allow for more adjustment! They are almost too cheap compared to some of the others Lowering control arms I have priced...
  14. Keanen55

    Leveling suggestions

    If you just looking to level the truck, they make a spacer that sits on top of the from shocks assembly. I gives the front an extra 1inch or 2 and it's cheap and easy to do. I guess would call that a body lift
  15. Keanen55

    Inverter ?

    Doesn't that inverter have a on/off switch?
  16. Keanen55

    Upgrade to Power Mirrors

    Yup, buy used driver and passenger window switches from a truck that had the option (I bought the switches from an totaled Escalade). Plug and play. You can buy new mirrors, those don't matter. Easy swap, Ive done it twice!
  17. Keanen55

    Rear center console/storage ideas

    I would custom build a console. I have the 1 listed above and there's not a lot of storage in it. I bought it of Craigslist cheap a long time ago!
  18. Keanen55

    Bluetooth on non xm radio

    You can get a radio cheap now a days. I would just replace it with an aftermarket radio.
  19. Keanen55

    ipad

    I'm redoing mine. I'm about $60 in materials and a little elbow grease. I think its coming along pretty good. Been working on it for 2 days. Im doing a 8.4" Samsung Tab A 2020. Still debating on wireless charging. Found a guy on ebay that 3D printed a kit for like $15 and using a Metra 108-gm2b...
  20. Keanen55

    Best Pricing I found for Eibach f&r sway bar kit- 470.00 shipped

    If memory severs me right, I got them off Auto Anything.com. They were running a promo code that gave 15% off at the time. This was a while back though!
  21. Keanen55

    Best Pricing I found for Eibach f&r sway bar kit- 470.00 shipped

    I went with the Belltech sway bars and have been happy with them. They were a lot cheaper from what I remember! Less than $400
  22. Keanen55

    6 15’s c-pillar wall

    YAAASSSS!! Nice setup! Way too much music for me, but it obviously hits hard by the looks of that windshield! Post some videos!!
  23. Keanen55

    Dash separated

    Probably not a bad idea to put some sound deadening material in there if you can get to it!
  24. Keanen55

    "luxury" amp transplant

    Why not just go aftermarket? A lot easier route and probably a better sound in most cases
  25. Keanen55

    Keep or Remove Running Boards?

    Keep them!

Forum statistics

Threads
132,376
Posts
1,867,005
Members
97,012
Latest member
Roscoe2352

Latest posts

Top