Search results

  1. Ceejkay

    New guy from OK

    Welcome, i deff like the white on white..
  2. Ceejkay

    WOW - I want!

    jeeze with all that work you think he could have taken a little better care of the seats.. and im seeing a rear end with a sway bar not a front :hands:
  3. Ceejkay

    Scantool

    no worries you were just trying to help. it will be nice to have live diagnostic so i can see where i can improve
  4. Ceejkay

    New guy here needs some help..

    my driver window locks up every once and a while in the full up position. im talking about twice in 8 months. i just take a punch and hit downward on that gear and it works again. then hit it up with some lube.. judging by the rivets on mine someone has replaced the assembly before... i know it...
  5. Ceejkay

    Scantool

    i ment tuning with using this system. Like is there a base tune that i can load then build off/ adjust settings ect..... i went this route with the possibility of a 0411 pcm down the road..
  6. Ceejkay

    Scantool

    Well i finally broke down and bought a scantool(laptop based). I realized with my esky that a good scan tool is as important if not more as a torque wrench. Here is the tool in question Any one use this on our trucks? I thought i read something about a gm add on was good to get. Also is there...
  7. Ceejkay

    Fender Flair

    how far do they stick out? i would recommend bushwacker. i have stock flares(99 escalade) and they cover pretty good, about 1 inch with 305/40/22 they look like the equivalent to bushwacker OE style (click here for link) and they are paintable so you can match you paint job on your avatar
  8. Ceejkay

    CV/Drive shaft question

    how does the sway bar link look? also look at the upper a arm bolt. strange i know but when i bought my truck the nut had one thread left holding it on. i could be wrong but in 2wd it wouldnt click or bump, due to no load..
  9. Ceejkay

    Strange Signal/Electrical Problem

    how do the connections on the battery, alternator, fuse block wires, ground wires look?
  10. Ceejkay

    One of those weeks. Need help!

    wow i pulled up an old post. what was the outcome? sounds like my truck when the crankshaft sensor went out. it didnt show a cel but it does throw a code.. i could be way off on that though.. ohh and be careful with grinding, i have to replace my flywheel from mine grinding
  11. Ceejkay

    putting a yukon denali front clip on a 99 Tahoe

    also expand your search to include 99-00 escalade. ive seen one in a u-pull it in florida.
  12. Ceejkay

    99 Escalade issues (alot)

    Wow thats alot of leg work you did, thank you. That is the tsb. when my truck starts its grinds right after it starts. every time.. i think thats a symptom i think that was one of the codes i got, i dont remember it has been a little while, and i dont own a scanner.. i did see one post about...
  13. Ceejkay

    99 Escalade issues (alot)

    Hey guys i normally search for all my problems but ive got a laundry list of stuff that i need to do.. here is the beginning So right after posting that, it was running a little rough, cel (ill get back to that), and due to moving and being broke i let it go.. So as of now this is what i got...
  14. Ceejkay

    Lift advise early 99 escalade

    Yea this plan is now canceled. i have way too many other issues to deal with this now. maybe in the future ill retouch on this but as now not gonna happen
  15. Ceejkay

    Lift advise early 99 escalade

    Hey guys im in need of advise for a lift. its a 99 escalade but the chassis is (from what i can tell) identical to the 95-99 tahoe. i dont have all the fancy escalade stuff on this model, they started that in 2000. So i own a bad ass truck(imo) with escalade styling. Lets go ahead and get...
  16. Ceejkay

    Bizzarre Vibration

    does it do it only when driving or any time its in drive? i would say look into your motor/transmission mounts. i had a jetta that had this problem, when under a load the gas pedal would *vibrate*. basically what was happening is when a load was applied the motor rotated to the right a little...
  17. Ceejkay

    99 Escalade 3rd row pics

    i think i might be putting it in backwards.. it would make sense to open the back to get in instead of having to put down the seat every time. but i have nothing to go off of.. the only vehicle i have ever had like this was a 88 suburban and you had to put one of the middle seats down to get to...
  18. Ceejkay

    99 Escalade 3rd row pics

    the head rests are not embroidered.. i think im going to have to go to Cadillac and have them take a look at it.. it cool having the 3rd row but if i cant figure out how to install it, its useless. also the seat is on tracks so it moves forward and back, the pics were with it back.. if it is...
  19. Ceejkay

    99 Escalade 3rd row pics

    As requested.. also if anyone knows how to install this *properly* i would love to know.
  20. Ceejkay

    New guy with 99 Escalade

    i can do that... it will take me a couple of days to get them up. i have to take out all the kid stuff and pull the seat out of my storage unit. the biggest reason i wanted a 3rd row seat was when family came to town we didnt have to take 2 vehicles to go places..
  21. Ceejkay

    New guy with 99 Escalade

    is it bad when i see Vehicle: Not Listed Year: 1999 Build Date: 1999-01-19 *all the other stuff* Rarity... Sorry, rarity information is not yet available for your car. Please check back soon. So im going to go ahead and say its rare. i will get pics up of the interior, just keep in mind it was...
  22. Ceejkay

    New guy with 99 Escalade

    im pretty sure the 3rd row seats are stock. the only thing custom to the truck is the rims.. ill do the rare vin check and see what comes up
  23. Ceejkay

    TYF Meet - Austin, TX (Sat, May 7th)

    thanks for the invite.. sorry thats a 24hr drive im not ready to take yet in the truck..
  24. Ceejkay

    New guy with 99 Escalade

    Thanks for the welcome.. Sorry im in Ft. lauderdale FL, and its mighty warm already. Another thing on the truck i forgot to add is its 4x4, and has the 3rd row seats..
  25. Ceejkay

    New guy with 99 Escalade

    Great site you guys have here. A little bit about the truck. I picked it up at the end of feburary from a friend for 900$. The previous owner had let it go for the last 2 years and it needed some work. So far i have replaced the most of the front suspension components, ball joints, tie rod ends...

Forum statistics

Threads
132,431
Posts
1,868,057
Members
97,109
Latest member
haloOne

Latest posts

Top