Search results

  1. 0

    New Member with New to me Yukon XL Denali

    Cool man, welcome aboard
  2. 0

    Camaro SS, track trips, build pics etc.

    So, in conclusion to the door panel portion of the thread.....I selected to lose power mirrors, and dash mount the switch. After careful consideration it seemed like the best choice for ease of installation and aesthetics. I carefully trimmed off the mirror control off the top of the master...
  3. 0

    Long tubes for my denali

    Buy the cheap longtubes and Y, and swap the mid section and muffler to a single in/out OR have a muffler shop make it all fit with the stock muffler.
  4. 0

    Camaro SS, track trips, build pics etc.

    First step, remove belt, PS pump, and hoses. Install your two fittings in the rack. Lower fitting is the pressure line. Fitting side of AN fitting Hose side of AN fitting. The ridges hold the hose, and there is a stop collar. Insert the hose fully till it stops on the stop collar ridge...
  5. 0

    Question for upgrading Towing capacity 06 Denali

    I did a few mods to mine to help towing though my application will be slightly different then you but maybe you can take a few cues. I did a AWD delete, rear gear swap, Circle D torque converter, big front mount aux trans cooler, rebuilt and beefed up 4l60e, Air Lift helper bags in the rear with...
  6. 0

    Camaro SS, track trips, build pics etc.

    Finally got the passenger rear seat delete done. They sent me the wrong color carpet so I sent it back. Not sure what Im gonna do so Im just leaving it for now. May get a wild hair and order some one day soon. I need to wire the door switches, then put the finishing trim on the doors and the...
  7. 0

    Auto climate control question

    AC compressor. AC is either on or off. To maintain ANY temp other then full cold it has to turn off periodically. Same way an air compressor does to maintain pressure in the tank for air tools.
  8. 0

    Camaro SS, track trips, build pics etc.

    Though i dont have many miles on this combo I always try to think of things that may be a potential issue down the road. I havent liked the idea of the plastic Dorman overflow tank, so I bought an aluminum one.......and made a simple L bracket. Quick test fit Have heard stories about how turbo...
  9. 0

    Camaro SS, track trips, build pics etc.

    Cool idea. Yeah they are nice for sure.
  10. 0

    Camaro SS, track trips, build pics etc.

    Got a little done this weekend. Basically started with this: Realized right off the bat, the hole they cut for the door handle was a courtesy cut, and nowhere near correct for install. This was my initial thinking, but ended up about doubling it due to me wanting the lock lever to be exposed...
  11. 0

    2/3 Drop and AT 20’s?

    Sure, should work fine as long as the tire will physically fit when lowered.
  12. 0

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Adjusted trans shift pressures.
  13. 0

    Zero oil pressure - is the damage done?

    Rod bearings generally take the first amount of abuse from lack of oil or aerated oil. They scuff up to a certain point until one finally spins. Takes more then just a little idling to do them in though.
  14. 0

    Powerstop rotor

    Bought a few sets. Seem very decent for the money, so far no issues.
  15. 0

    Camaro SS, track trips, build pics etc.

    Got the AN hose ends in, and the MAP sensor pigtail installed. When I cranked the car it was idling at 16.5 AFR so i threw some fuel at it in HPTuners and realized I'm probably starting over from scratch retuning the car. Not super thrilled about that. Got to play with the cutoff wheel a little...
  16. 0

    Camaro SS, track trips, build pics etc.

    Hope not!!!!
  17. 0

    Camaro SS, track trips, build pics etc.

    Thanks, well that probably took a while LOL
  18. 0

    Camaro SS, track trips, build pics etc.

    Summit dropped off a surprise. Spent the morning making some simple brackets out of 1.5" wide flatbar. Though the seats are very stable, I think I going to add a backbrace to them temporarily until there is a cage to support the backrests. After an hour of cussing i got the passenger door bar...
  19. 0

    Camaro SS, track trips, build pics etc.

    Well if you remember the ttop well removal and flat floor installation a few pages back, its gonna be just like that. Wouldnt be a bad spot to mount an oil cooler or something.....hmmm idears.
  20. 0

    Camaro SS, track trips, build pics etc.

    The floor is actually dipped in to allow the seat cushion to sit flat. On this pic, see how the floor is flat, then dips into a bucket about where the seatbelt mount comes through the floor? Im going to eliminate that bowl shape. No real reason other then it gives me a little more room under the...
  21. 0

    Camaro SS, track trips, build pics etc.

    She's been on the back burner for a bit, other then the pickup tube repair, due to the turbo TA i was building for a buddy. But she went home Sunday so its time to get back on this car and get ready for some personal best springtime ETs. And we know these cars are never done right? So I had a...
  22. 0

    Djm rear kit

    Sounds like he already owns the parts.
  23. 0

    Nivomat load leveling shock absorber Conversation to BILSTEIN

    5100 is for lifted trucks, 4600 is for stock or slightly lowered. I removed my autorideshocks and stock compressor setup. Replaced it with bilstein 4600s and AirLifts bags (go inside stock springs) and compressor/gauge. Works awesome. I monitor bag psi from the drivers seat and add or fill air...
  24. 0

    Low engine temp on cold days

    Sounds normal to me.
  25. 0

    Camaro SS, track trips, build pics etc.

    Basically, the motor was super healthy at 101k miles. It did shave the rods some due to the cavitation. I did cut the filter open and its not as bad as the last motors filters were, but there was no doubt an above average amount of bearing floating through the engine. I did the best i could, did...

Forum statistics

Threads
132,684
Posts
1,872,488
Members
97,488
Latest member
Seanw

Latest posts

Top