Check date code on tires so you can keep track of what's going on. If they are same, they just rotated tires to change position. This dealer is not being straight forward.
Usually tire manufacture warrantees the tires but being tires have taken a set from setting for 8 months I'm guessing GM...
Dealer should make sure vehicle retrievers they hire to tow in these vehicles have the tool to release park pawl for towing vehicle back to dealership for repair. In reading the forum seems a lot of damage and problems with hired tow services.
I would be questioning them about that that is a safety issue. They are not allowed to sell unites until repaired but let customers drive their vehicles with this issue going on. I bet they fixed the ones they couldn't sell ASAP and letting customer drive unsafe vehicle.
Thats a new one you might talk to service at GM to see if they have seen that before. I wonder if oil change place ran that engine without oil for a while, then put oil in crankcase after they realized they forgot.Is there galling marks on outside of broken parts crazy.
If you go to Walmart online, you can find scanners if you add a little more money that may help you in future for ABS and for bleeding brakes. monitors live data.etc.here is link to one...
Could be coincidence but moisture dripping on it could cause problem.
I just think you could smell the anti-freeze if leaking but won't hurt to check hoses.
You might tie rag around the heater hose tight with zip ties so doesn't touch something and catch on fire and after driving it for a while to see if it gets wet or damp. Try to rule the heater hose T out.
You are using deep well socket to install the sensor on the old one looks to have had a open end wrench on it by seeing knick on hex. When using open end, you take a chance in breaking seal on top part of sensor. I would use deep well socket for installing sensor.
If you turn wrenches, it would be worth pulling pan and replace pump and O-ring to see what happens. Being low on oil and if I'm reading this right wasn't driven after showing no oil pressure. You have nothing to lose unless when you drain oil there is metal in oil.
I have 2017 Yukon with skid plates and have no trouble changing oil and filter. I have these homemade ramps in link and works well and also helps oil drain to the drain plug.
I'm just work on vehicles at home but on trucks I pull wheels off to get vehicle lower now that's why Ilike working on my 1996 corvette you just walk in and sit on tire to work on it.
In his picture in link looks to be number 6. You can use part number for 6 to do search.
https://www.gmpartsdirect.com/v-1999-chevrolet-tahoe--lt--5-7l-v8-gas/body--frame-and-components
Does this match yours.
https://www.ebay.com/itm/314324268887?var=0&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338767525&toolid=20006&customid=4581664967841091_377870104_o
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.