Search results

  1. Doug118

    Spring too close to Frame?

    And yes the links are installed correctly
  2. Doug118

    Spring too close to Frame?

    I’ve had an issue with my DJM links from day 1. I even had to remove the bolt that bolts the shock bracket on and weld it to the axle. You can see in the bottom of the first picture, the sway bar practically sits over the bracket on the axle
  3. Doug118

    Time for a c-notch

    that’s all the room I have left. Just enough to fit a 24 pack of water bottles lol 2-1/2” wide is all I need
  4. Doug118

    Time for a c-notch

    I had 24’s on it but the drop requires nothing bigger than a 30.5” tire, which makes the tire very small. I broke one of my wheels the first day I had them on the truck so I went back to 20’s with a 255/50/20, which is a factory Range Rover tire so they’re fairly common and cheap
  5. Doug118

    Time for a c-notch

    It’s a 6” drop spring but there’s about 700lbs in audio in the back so that dropped it another 1” how wide is the piece of tubing? I was trying to find 1/2” wall but couldn’t find anything smaller than 6.5” OD and that’s too big
  6. Doug118

    Time for a c-notch

    Snow that I was too lazy to clean off lol I LOVE the way it looks but it rides like absolute dog shit and I keep breaking belts in my tires since they’re pretty much the only sort of suspension I have now The frame needs more cutting and hammering for the panhard bar it’s getting a round...
  7. Doug118

    Recommend a rear seat cover

    thanks. This is the route I’m going to go
  8. Doug118

    Time for a c-notch

    With any more than 3/4 tank of gas, the frame actually sits on the panhard bar mount and axle. Obviously I didn’t trim the frame enough to clear the panhard mount on the axle but the frame will be c-notched soon for some actual suspension travel
  9. Doug118

    Recommend a rear seat cover

    I have one of those seat protectors but I need more of a cover. I have amps and a bunch of wiring under my rear seat and I don’t want anything to spill into the split in the seat and cause an issue
  10. Doug118

    Recommend a rear seat cover

    I’m having my first child in a month and really want a full rear seat cover. Any brands you guys recommend? I’ve never bought covers before so I have no idea which brands to stay away from
  11. Doug118

    Project overboard

    yes it’s out of a Ford hybrid
  12. Doug118

    Project overboard

  13. Doug118

    Project overboard

    New battery setup
  14. Doug118

    No rear swaybar

    Already have that kit and yes it’s installed properly. Like I said I’m not the first person to run into this problem with a big static drop in the rear
  15. Doug118

    No rear swaybar

    this is the bolt it rides on. I’ll get under and see if there’s a way to just zip tie it up after disconnecting the links
  16. Doug118

    No rear swaybar

    every time I’ve seen someone say they have the exact same problem, they say “it shouldn’t do that, it must be installed wrong” so I’m not even going to bother asking them I just don’t want to go through the trouble of removing it, have it handle poorly, then have to reinstall
  17. Doug118

    No rear swaybar

    Thanks for your useless reponse
  18. Doug118

    No rear swaybar

    Has anyone removed their rear swaybar on 4/6 drops? Mine is riding on the control arm bolt and it makes the truck do some funky stuff when going over off-axis bumps. Before I go through the struggle to remove it, I want to see if anyone has taken theirs out and not regretted it
  19. Doug118

    iPad dash in the works....

    Here’s how mine was done. Don’t mind the shitty lighting
  20. Doug118

    Cooled seat swap

    I searched and couldn’t find an exact answer. What’s required to swap cooled seats to my 07 LTZ? I already have heated seats but not cooled. Will the existing harness work and just swap the seats or is it an entirely different harness?
  21. Doug118

    Trying to get low

    Not sure what this equates to drop wise but this is where it sits with half a tank of fuel. front is at 29-3/4” and rear is at 30-7/16”
  22. Doug118

    Trying to get low

    You can notch up to the spring pocket. Someone on Facebook sent me these of how he did his truck. When I get mine done, I’ll just be cutting a 5” pipe in half and doing round notches
  23. Doug118

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    that’s insanely cheap. I paid $600 to get my entire suburban done, including windshield. Non-ceramic. But I know the guy who did it and it came out flawless so I’m not mad at the pride I paid
  24. Doug118

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    To prevent the quarter panel from tearing more than it already has
  25. Doug118

    Project overboard

    It’s the sheet metal on the inner quarter panel. The poor truck is literally being torn apart

Forum statistics

Threads
132,776
Posts
1,874,100
Members
97,610
Latest member
Alexbarron

Latest posts

Top