Search results

  1. cmyoung2007

    Spark plug issues!!!

    https://pdf.ac/117UTN Can anybody tell me what the electrical connector below the valve cover attached to the side of the engine block is for? It’s the electrical connector right under the holding post for the battery + box
  2. cmyoung2007

    Spark plug issues!!!

    It still makes a misfiring code come on as pending/stored. I’ve been dealing with the check engine light for a couple days now on that part.
  3. cmyoung2007

    Spark plug issues!!!

    https://share.icloud.com/photos/086LHON4VH0jMZkctkmP0Ndmw Will ya’ll lmk if this works? One and two are the ones that misfire the most.
  4. cmyoung2007

    Spark plug issues!!!

    I can tell you the misfire numbers are way lower than what they were to begin with after changing to ngk and you could hear the misfires before, but now you can’t. I will swap the wires after I get off work.
  5. cmyoung2007

    Spark plug issues!!!

    Yeah, I know that now. It didn’t click in my mind right at that moment.
  6. cmyoung2007

    Spark plug issues!!!

    Ahhh, okay. Odds on driver side, and even on passenger side.
  7. cmyoung2007

    Spark plug issues!!!

    I took a video, but it won’t let me upload it. Are you talking about the coils?
  8. cmyoung2007

    Spark plug issues!!!

    I am watching the misfire count as I’m driving, and the only cylinders that aren’t misfiring are seven and eight.
  9. cmyoung2007

    Spark plug issues!!!

    I didn’t move or unhook anything except swap ignition coil one and two to see if the misfire would happen and to see if it was a cause because of that. They have been moved back since then.
  10. cmyoung2007

    Spark plug issues!!!

    Could it be a coincidence that all of my ignition coils failed?
  11. cmyoung2007

    Spark plug issues!!!

    I used a Hart 5/8 spark plug socket.
  12. cmyoung2007

    Spark plug issues!!!

    I did not use dielectric grease on the spark plug wires this time. The Tahoe has almost 300,000 miles on it. It’s sitting at 298,600 right now.
  13. cmyoung2007

    Spark plug issues!!!

    I made sure the NGK Spark Plugs gap was set to 0.040 and they were straight out of the box.
  14. cmyoung2007

    Spark plug issues!!!

    I apologize about that. I edited the post and included all the information of the vehicle. I was replacing the plugs and wires because they have never been replaced since the car was bought. The first ones were a-premium spark plugs and wires, and then I bought the NGK IX Iridium Spark Plugs...
  15. cmyoung2007

    Spark plug issues!!!

    Yes, I did. I have a foxwell NT809BT scanner, so if you or anybody has any experience with advanced scanners and can tell me what to use on it to find out what the problem could be, I’m all in for it. I’ll upload a screenshot of the misfires here in a little bit.
  16. cmyoung2007

    Spark plug issues!!!

    I’ve done that twice now. I bought new spark plugs online. I installed those and it was misfiring, and then I bought NGK’s from AutoZone and it’s still misfiring, but not as bad. The original spark plugs that were in it before all of this was Acdelco Spark Plug 41-110. I did some research on...
  17. cmyoung2007

    Spark plug issues!!!

    I have a 2004 Chevy Tahoe LS 5.3L V8 Flex (VIN Z TYPE), and I just replaced the spark plugs and wires. I’m now having a code being thrown and it is p0300. Does anybody know what the problem could be?

Forum statistics

Threads
133,819
Posts
1,891,572
Members
99,139
Latest member
jrmhokie

Latest posts

Top