none on lmc will try latemodelrestoration..... vintage parts which all gm dealers must sell their parts over 10 years old to and you have to order from through the dealer doesn't even have any
---------- Post added at 10:17 PM ---------- Previous post was at 10:12 PM ----------
none there...
getting the ac delco compressor at wholesale would save you no money with shipping it is 185 wholesale 200 on amazon so not really worth it sorry
when i cleaned my evap core i removed the blowed and then i stuck water hose in and sprayed the hell out of it i removed the foam below it on top...
Im redoing the inside of my 98 2dr 4wd Tahoe grey interior any ideas where i can find driver side rear side panel and jack cover??? i have looked in lmc and cant find one and none in junk yards ( found pass side there in junk yard) please help????
shaking issue could simply be tires out of balance especially if it smoothes out at higher speed find someone with a hunter road force balancing machine and check that could fix the whole problem there and although rotors are new it is not uncommon to get a warped one from factory causing the...
so when you do this conversion when you say heavier steering asin it feels more like non power steering or what do you mean also does it make steering less responsive
yeah yeah laugh it up i walked out this morning after a terrential rain and there were scratches showing again last night they were all gone i laughed too 3 hours of work semi wasted most are gone though
i will find out tom how much i can get an acdelco for thru work it may be cheaper for me to get it wholesale and ship to you may not be but you never know i put one in my truck (not acdelco) for 126 bucks
I tried using turtle wax rubbing compound with a buffer and terry cloth pad got most of my scratches out but I have some I know should be possible to get out but they didn't come out. Don't get me wrong it looks ten times better but any ideas on a good rubbing compound that will get this out...
ok so scratches did not stay out long think i am going to try a grittier rubbing compound just scared because paint is black any recommendations or pointers
I was able to buff out 95% of the scratches man does it look so much better already i wish i had taken pics before i did anything it has come 10 20 fold already
Today on the project i buffed out tons of scratches and got new tires Federal Couragia MT 285/75/16 got all 4 brand new for 250 through work so couldn't pass it up here are a few pics before i started buffing shows the inside still in progress
mine is in flowood, ms but we have 43 locations throughout us in Mississippi, Tennessee, Ohio, Oklahoma, Louisiana, Texas, and Arkansas and maybe a few more states but those for sure
in my 98 in came inside but like i said i was replacing carpet and heater core (leaking) anyways
on the lowside switch i work at Gateway TIre and Automotive which is a big shop we have 6 mechanics my ac guy checked it out and he told me so not sure on how to tell for sure but it cost me 5...
i had same issues kinda i replaced low side pressure switch and put a water hose through dash where blower motor normally is and sprayed evap core out now air blows hard and cold i know access to evap core may not be as easy in you model but if it is it is worth a try
---------- Post added at...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.