Search results

  1. about20ninj45

    Tonyrodz's Tahoe Build Thread

    Everyone makes a valid point. If the bottom is clogged, it would just keep cycling the same oil and add a bad oil pressure sensor in the mix and you’d never be able to tell what’s going on. Verify oil pressure first with a pressure gauge, use mechanics stethoscope or a long pice of metal pipe...
  2. about20ninj45

    Tonyrodz's Tahoe Build Thread

    Roflmao
  3. about20ninj45

    Tonyrodz's Tahoe Build Thread

    I wouldn’t say it was done yet, just because it’s ticking. Is the noise coming from the top end or the bottom end? I understand about removing the passenger seat to get the dog house out of the way, but once you do it’s smooth sailing from there. Leave the passenger seat out if your gonna be...
  4. about20ninj45

    Tonyrodz's Tahoe Build Thread

    Pull the oil pan and check the pan for material, if none is found, check the pickup tube to see if it's clogged or if the o-ring is worn. Dumb question, but are you relying on the gauge in the cluster or have you verified no pressure with an actual gauge?
  5. about20ninj45

    02 Yukon sunroof won't close all the way

    Is the window aligned properly?
  6. about20ninj45

    Tonyrodz's Tahoe Build Thread

    Damn! Did you yank the engine or work on that while still in the vehicle? Either way, good job, because I certainly would just walk away from it. I have a 06 3500 express van with about 355,000 miles and I just developed a misfire. Are you going to replace the short block and reuse the accessories?
  7. about20ninj45

    Demon possessed heated seats!

    I had this problem a couple years back. I replaced the driver side door switch/ controls and replaced the heating element. The only seat that kept coming on by itself was the drivers seat, so that helped me narrow it down. Passenger seat didn’t have any issue whatsoever. But between the two...
  8. about20ninj45

    Tonyrodz's Tahoe Build Thread

    What van did you get?
  9. about20ninj45

    LSA Escalade

    what style heads come on the 2013 NNBS?
  10. about20ninj45

    LSA Escalade

    Who are you referring to? Which member?
  11. about20ninj45

    LSA Escalade

    What year Escalade? NNBS or nbs
  12. about20ninj45

    Hmmmmm

    Bring it to Michigan and I'll title it and then sell it back to you for more than what you paid for it. Lol. Our laws here are laxed
  13. about20ninj45

    DIY: Tahoe Rear Brakes

    So I can confirm that some calipers are different, other than the single or dual piston. My caliper pins do not come out of the caliper, at all. The bracket slides directly over the pins and I don't know how the hell it stays in place. I confirmed this on my old caliper and the new one I just...
  14. about20ninj45

    AWD Shift Selector Problem

    There's only two shift forks, one for high and one for low. If your engaged in one more and not the other, then yes, a shift forks could have failed, only way to know for certain is to drop that transfer case and crack it open. Also, you won't get a coffee for broken pads on a shift fork
  15. about20ninj45

    AWD Shift Selector Problem

    There's only two shift forks, one for high and one for low. If your engaged in one more and not the other, then yes, a shift forks could have failed, only way to know for certain is to drop that transfer case and crack it open. Also, you won't get a coffee for broken pads on a shift fork
  16. about20ninj45

    About20's FI build (slow build)

    Lmao shhhh. We're always wrong
  17. about20ninj45

    About20's FI build (slow build)

    Lost 3rd and overdrive. Still have 1st and second
  18. about20ninj45

    AWD Shift Selector Problem

    Put it on Jack stands, have someone try to engage stabilatrac mode, while listening for the engagement of the transfer case. If it doesn't sound normal, or doesn't engage, the shift forks in the transfer case could be broken, not allowing it to shift in that mode. I believe their are two shift...
  19. about20ninj45

    AWD Shift Selector Problem

    What transfer case do you have?
  20. about20ninj45

    About20's FI build (slow build)

    4l85e swap starts now...
  21. about20ninj45

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Thanks. It wasn't even the pumps. It was the gaskets that failed, but since the pump got hot, I replaced it anyway.
  22. about20ninj45

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Screw oil cooler lines and water pumps... Replaced water pump, radiator and oil cooler lines
  23. about20ninj45

    Turbo Tahoe?

    Dyno goes for Max power at wot. Not really street tuned. You can achieve this on the Dyno, but most the need are time pressed to get the next customer in the door to get paid, so they cut corners. That's why I like road tuning
  24. about20ninj45

    My Heated Seats started turning themselves on...

    Check the resistance of the wires coming from the heating element. I don't know what specs are off the top of my head, but you should be able to find them online.
  25. about20ninj45

    Turbo Tahoe?

    No problem! You have quite a few options, Ill list them out for you. Option 1: Keep your WB that you currently have now and wire it in via ac pressure switch or another stock sensor that has a 0-5v output, with a switch, so you can still use your A/C when your not logging. (cheapest route)...

Forum statistics

Threads
132,407
Posts
1,867,571
Members
97,068
Latest member
tahoe_highcountry

Latest posts

Top