Search results

  1. Rob Scariano

    JL Audio C7s in 2 Door Tahoe

    I'm dropping my 2 door off today to get the following installed 1 - Metra Double Din Bezel 1 - Kenwood Excelon DMX957XR (w/XM Receiver, Rear Camera, Forward Camera) 6 - JL Audio C7 3-Way Component Speakers (2-tweeters / 2-3.5 Inch / 2-6.5") 2 - JL Audio 12W3 Subs 1 - JL Audio VX800/8I 1 - JL...
  2. Rob Scariano

    LS vs 383 Stroker

    That would be the best way to do it. I've thought about that too. I found a 454 burb, same year, rebuilt 4L80 transmission with 14 bolt rear end. Everything I needed for 1800. The motor needed new rings as it was burning oil but it would have been worth it to convert the truck over. Although...
  3. Rob Scariano

    LS vs 383 Stroker

    Funny you mentioned that. I did look at the 8.1 and other built BBs as an option. The 383 stroker from blue print has the almost same specs as a stock 8.1 with terms of HP and torque albeit the 8.1 produces 450 lbs of torque at 3000 rpms which is much better since its down at the low end. Price...
  4. Rob Scariano

    LS vs 383 Stroker

    I agree. It's personal preference at the end of the day. Personally, I'd like to have more of a cammed out performance engine. My truck isn't a daily driver and I'm not 100% concerned with fuel economy. With that said, the LS can be upgraded as well, but here is the issue: Regardless of how...
  5. Rob Scariano

    LS vs 383 Stroker

    http://www.blueprintengines.com/index.php/products/bp-gm-crate-engines-landing/gm-383-main/item/gm-383-engine-specs-bp38313ct1
  6. Rob Scariano

    LS vs 383 Stroker

    Hi Folks, I've done 3 months of consistent research on the subject topic. Here are my findings. There are tons of people out there that think the LS swap is the way to go. Is the LS a great engine, sure. Does it get decent gas mileage, sure. Is it reliable, yes. However, is it really the...
  7. Rob Scariano

    To sell or not to sell!

    I recently listed my Tahoe on Craigslist. Shortly after, I had "sellers" remorse and I haven't even sold it yet. There is something apparently special about 2 door Tahoes. I can't explain it but after meeting numerous people, who all say, I regret selling my 2 door, I've decided to keep mine...
  8. Rob Scariano

    help me, lift tahoe lt 2wd (Cheap)

    Hi Walter, There really is no such thing as a cheap lift, with regard to creating a monster. However, it is rather affordable to slap on a 2 or 3" body lift. Your suspension geometry/drivetrain will remain the same, you are simply lifting the body with a body lift. Most DIY folks can do it...
  9. Rob Scariano

    350 swap for a 350 vortec

    You will need a custom tune FYI. That will cost you an addition 4-500 depending on where you go or live but after months of research, I've chosen this option for mine. Don't forget to change the torque converter to accommodate the cam.
  10. Rob Scariano

    350 swap for a 350 vortec

    Best bang for buck right here. Ships with Vortec intake compatible heads, will bolt right up, your factory PCM will run it, and will give your truck over 400 HP. http://www.blueprintengines.com/index.php/products/bp-gm-crate-engines-landing/gm-383-main/item/gm-383-engine-specs-bp38313ct1
  11. Rob Scariano

    4X4 club in Omaha, NE

    Anyone know of any 4x4 clubs in Omaha,NE that are active. I've contacted all of the clubs I've found online and none of the numbers/email addresses worked. Any help is greatly appreciated. Rob
  12. Rob Scariano

    Post up your OBS 4x4 on 22x9 wheels.

    Thanks man. The 20x10's have a negative offset. (-24). That keeps the wheel from sticking out too far, but allows proper clearance.
  13. Rob Scariano

    How high can i go with cranking and rear blocks?

    Crank on ground with weight on wheels. I've done it many times with no issues. You will get various opinions. However, I've never had a problem. Just make sure to realign it once you get to your final height. My torsion bars are cranked to the top. It rides rough but that's only because the...
  14. Rob Scariano

    Post up your OBS 4x4 on 22x9 wheels.

    20X10's with 37's
  15. Rob Scariano

    Line X va Raptor Bedliner

    Just thought I'd share a quick post for those who may be looking for some additional feedback on this topic. To start, I'm sure others have already posted similar threads. I'm just sharing my experience. I was recently sitting on the fence as to wether or not to pay Line X the ridiculous cost...
  16. Rob Scariano

    1/2 ton to 3/4 ton

    The HT383 is a well built engine but it's really designed for extra towing power. Hence the lower compression. I'm going with something a little more radical. I don't tow with mine and I never will. With that said, I can get more bang for my buck with a built crate engine. Right now it looks...
  17. Rob Scariano

    Fwd stopped working?

  18. Rob Scariano

    97 Tahoe oil pressure.

    At the end of the day, I run 10w-40 in the summer, 10w-30 in the winter. Runs fine, and it did improve OP slightly. 10w-30 is recommended year round but 10w-40 isn't going to hurt it in the slightest bit. Even 20w-50 is fine. I've done it on quite a few vehicles and never had one single problem...
  19. Rob Scariano

    1/2 ton to 3/4 ton

    I am in the process of doing "all of this" myself. To start, the absolute most important thing you can do is swap the 10 bolt rear diff for a 14 bolt. During this time, it would also behoove you to go ahead and add disc brakes in the rear. There are plenty of 14 bolt 6 lug axles out there...
  20. Rob Scariano

    Will I run into problems putting a 99 4l60e in my 97 Tahoe?

    I have heard that the 98 4L60 may not be compatible PCM wise. I would double check before you buy it. Any solid transmission shop should know.
  21. Rob Scariano

    Won't do a Burnout..

    Cheaper to build power but not in quality. Lol
  22. Rob Scariano

    Will I run into problems putting a 99 4l60e in my 97 Tahoe?

    It should be compatible. Some 97's had the one piece transmission left over from 93-97. However, starting from 96, Chevy offered a two piece which allowed you to remove the bell housing. From what I can tell, I don't see any issues with compatibility. However, here is a link to a very good...
  23. Rob Scariano

    Won't do a Burnout..

    Lol, it's a fair statement as it all comes down to preference. However, I am seeing a lot of ford guys lately with Chevy engines installed in their cars :)
  24. Rob Scariano

    1500 Tahoe With 4L80E, Computer Issues HELP!

    Sounds like you came across an inexperienced dealership. They can absolutely reprogram the OS on the PCM to accept the 4L80. Alternatively, you could pull the PCM and send it to HPTuners (www.hptuners.com). I've done a bit of research on this as I plan to do the same thing. With that said, I...
  25. Rob Scariano

    1500 Tahoe With 4L80E, Computer Issues HELP!

    Did you switch the 4L60 out for a 4L80?

Forum statistics

Threads
132,379
Posts
1,867,052
Members
97,017
Latest member
97ext

Latest posts

Top