00-02 to 03-06 seat swap???

[Rob88]

Had anyone done this? I know the seats bolt up fine, and I'm aware there are some differences in the plugs for the power controls. What concerns me is the airbag compatibility. I remember someone saying once that its a different type of system for 03+ for the wheel and dash, but I cant find any info on the seat swap.

 

[Tonyrodz]

Which airbags? We don't have any in the seats. The 03-06 has an airbag pressure sensor in the passenger seat.

 

[Rob88]

The seats in my 2000 have "airbag" on the sides and have the yellow airbag connector under each one.

 

[Rob88]

Which airbags? We don't have any in the seats. The 03-06 has an airbag pressure sensor in the passenger seat.

and...when the driver airbag plug was undone, the airbag light on the dash stayed on.

 

[Tonyrodz]

The seats in my 2000 have "airbag" on the sides and have the yellow airbag connector under each one.

I need to look at mine better then. I don't have airbag on the side of mine.

 

[Pachanga02]

The airbag plug is the same. I swapped my 02 Denali seats for esky seats from an 04 and the only thing I was able to use was the power and ground to have the move, only downfall is that memory and heat is lost.

 

[adventurenali92]

Which airbags? We don't have any in the seats. The 03-06 has an airbag pressure sensor in the passenger seat.

My front seats have airbags in the sides in my 2006.

 

[Ryan Buck]

Had anyone done this? I know the seats bolt up fine, and I'm aware there are some differences in the plugs for the power controls. What concerns me is the airbag compatibility. I remember someone saying once that its a different type of system for 03+ for the wheel and dash, but I cant find any info on the seat swap.

I'm doing something similar at mine I have a 2002 and I'm putting the seats out of an 04 Escalade in it I was trying to figure out that the same problem too but now I've just decided to pull the covers and foam off of the new seats and put them on my old tracks that way I don't have to worry about none of that

 

[adventurenali92]

I'm doing something similar at mine I have a 2002 and I'm putting the seats out of an 04 Escalade in it I was trying to figure out that the same problem too but now I've just decided to pull the covers and foam off of the new seats and put them on my old tracks that way I don't have to worry about none of that

Make sure you take the foam cushions off the 2004 seats as well and swap them to your 2002 seats, otherwise the leather cushion won’t fit properly and will slide around while you’re sitting on them.

 

[Ryan Buck]

Make sure you take the foam cushions off the 2004 seats as well and swap them to your 2002 seats, otherwise the leather cushion won’t fit properly and will slide around while you’re sitting on them.

Okay cool I was planning on doing that because the cushion on my driver seat is blown the F out that's why I bought the new seats to begin with plus I wanted the captain in the rear I don't know why nobody rides back there though but I like the way they look I guess