01 Yukon G80 GT4 rear axle failure? Spider damage

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KR66

Member
Joined
Sep 17, 2017
Posts
96
Reaction score
16
What do you think caused the tips of the spider gears to get chewed up? There's nothing wrong with anything else I pulled the carrier and checked everything else! Its just the spiders.IMG_20180514_123140.jpg IMG_20180514_123140.jpg IMG_20180514_123130.jpg IMG_20180514_123140.jpg IMG_20180514_123130.jpg
 
OP
OP
K

KR66

Member
Joined
Sep 17, 2017
Posts
96
Reaction score
16
OP
OP
K

KR66

Member
Joined
Sep 17, 2017
Posts
96
Reaction score
16
Is this that junkyard axle or the original? Maybe one or both axles was bent.
It’s the original I didn’t pull the entire axle just enough to get the carrier out! But when I had it up off the ground the wheels turned true
 

Scottydoggs

Full Access Member
Joined
Dec 16, 2017
Posts
2,650
Reaction score
3,989
Location
NJ
miles and a right foot is my guess. i burned up a locker in a 2500 hd 14 bolt full floater. lots of snow plowing and 100,000 miles. got that replaced with 40 miles left on my warranty too ;)
 

Chubbs

Full Access Member
Joined
Jun 24, 2017
Posts
634
Reaction score
391
you need wipe a magnet through the lube that you drained out of it. or filter it through a screen
 
OP
OP
K

KR66

Member
Joined
Sep 17, 2017
Posts
96
Reaction score
16
you need wipe a magnet through the lube that you drained out of it. or filter it through a screen
Did that there’s plenty of metal powder in the oil and a nice flower on the cover magnet
 

Chubbs

Full Access Member
Joined
Jun 24, 2017
Posts
634
Reaction score
391
are you going to replace gears only? or the whole assembly?
 

Forum statistics

Threads
132,446
Posts
1,868,357
Members
97,141
Latest member
NJPlantman
Top