03 Denali sway bar links

[HiCountryMan]

I have an 03 Dublin motorsports Denali. Its lowered 2" Had a front sway bar link break and can't seem to find replacements for this being lowered. Any of you guys know where I can check?

Thanks
RC

 

[NathanJax]

you can get these at Napa or any auto parts store and they come in different lengths...

 

[HiCountryMan]

Thanks

I was checking at all the places sold lowered susp.s etc. didn't even think of Napa.

Thanks
RC

---------- Post added at 07:28 AM ---------- Previous post was at 07:21 AM ----------

One question. Am I looking for the 94-06 Mustang V6 links in the pic of or the same thing but for Denalis.

thanks
RC

 

[NathanJax]

One question. Am I looking for the 94-06 Mustang V6 links in the pic of or the same thing but for Denalis.

thanks
RC

lol... I noticed that link was from a mustang site, but our fronts look the exact same.

 

[HiCountryMan]

OK thanks lol I just wanted to check. I live in the boonies in NE Wa and its a ways to the parts store.

 

[CrashTestDummy]

They are fairly standard. Measure the hole in the lower control arm and the sway bar end, and find a set that will fit the hole. Since your truck is lowered, you'll probably want to get a set that are a bit shorter than stock. Energy Suspension makes replacements and in different lengths to accommodate lifts/drops. You can peruse their catalog to see if there's something that'll work from them.


Here's a stock replacement:

http://www.oreillyauto.com/site/c/d...k=Search_02973_1445276_431&pt=02973&ppt=C0106

The bolt is 7-1/4" long.

And here's an Energy Suspension 'Adjust-A-Link' version that allows you to adjust the distance between the sway bar and lower control arm between 2-3/4" to 3-1/4":

http://www.oreillyauto.com/site/c/d...k=Search_N1031_1445276_431&pt=N1031&ppt=C0106

so yeah, there's a fair amount of range available.

 

[HiCountryMan]

Appreciate the info. These will work great. Napa had some like Nathan gave me info on but not the correct lengths. our local napa store has gone down the tubes in Newport,WA.

Thanks
RC

 

[Donnie Yukonie]

Nathan Slipping