rockola1971
Full Access Member
How about a T56 with a remote shifter to ease your shifter installation into the K chassis?
03 Yukon Denali manual swap...maybe?
- Thread starter 97SLeeper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Blackcar
Full Access Member
- Joined
- Mar 31, 2018
- Posts
- 708
- Reaction score
- 622
They put this transmission on V-6 and dodge truck Willis.
rockola1971
Full Access Member
I guess I missed the part where anyone was saying anything about dodge truck engine or transmission being used. Im not even gonna comment on the v6.....
Blackcar
Full Access Member
- Joined
- Mar 31, 2018
- Posts
- 708
- Reaction score
- 622
Since I suggested OP look at the 3500 was just suggesting watch when and if OP went that direction to be carefully with bell housing. Since it was used in other vehicles and brands. Which is why my suggestion on donor vehicle.
Which makes your replies to my post nonsense.
New Venture Gear 3500 transmission - Wikipedia
Last edited:
If I remember correctly, The awd transfer cases use a 5-bolt pattern unlike the 6-bolt pattern on 4wd transfer cases, This will be the biggest issue with trying to use stock transmissions and transfer cases. -UPDATE: Appears it is a 6 bolt flange so that isnt an issue, Im guessing the problem is the input spline count wouldnt match? You should be able to disassemble and swap input to fit 32 spline manual output shaft.
I did an nv3500 manual transmission swap on my 2003 Suburban 4wd. Got rid of the 246 A4WD and replaced it with a 241C from behind a 4L80E since it has the same output spline as NV3500/4500. Did no tuning im happy with how it runs sometimes it high idles when coming to a rolling stop in neutral but slows down after a second at 0kmh
I did an nv3500 manual transmission swap on my 2003 Suburban 4wd. Got rid of the 246 A4WD and replaced it with a 241C from behind a 4L80E since it has the same output spline as NV3500/4500. Did no tuning im happy with how it runs sometimes it high idles when coming to a rolling stop in neutral but slows down after a second at 0kmh
Last edited:
03catburban
Full Access Member
NV3500 swap is easy. Have any questions I'll try my best to answer.
www.tahoeyukonforum.com
03 cateye suburban build
Just slightly over 2 yrs ago when I said I'd make a video lol. well I finally did but nothing fancy just going through the gears. That’s awesome man.
www.tahoeyukonforum.com
Similar threads
