04 burb stalls while stopping

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Shatcher0428

Member
Joined
Oct 17, 2021
Posts
32
Reaction score
21
Hey guys I have an 04 suburban and am completely puzzled. Occasionally during the week whenever I come to a complete stop the idle drops and it dies. It will immediately start back up but if I do not hit the gas will die again. It will even do it in neutral. Now in park it will remain running. This does it randomly and when I am driving 80% of time it runs great zero stalling. Engine has been rebuilt, new crank sensor and cam sensor, recently changed the coolant temp sensor due to failure and replaced pigtail at same time. After installation of new temp sensor is when I really started to noticed the stalling issue. Only engine code is Evap code. Any help would be great! Thanks!
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
11,826
Reaction score
24,051
Location
Elev 5,280
Welcome to TYF.

A vacuum leak could cause a stall at low idle, also has the throttle body been cleaned lately? Is the IAC on the throttle body working correctly?
 
OP
OP
Shatcher0428

Shatcher0428

Member
Joined
Oct 17, 2021
Posts
32
Reaction score
21
I replaced throttle position sensor about 2 years ago, along with fuel pump, filter and regulator. Also has new mass air sensor. It is a flex fuel engine if that makes a difference. I didn’t think the 04 burn flex had an iac?
 
OP
OP
Shatcher0428

Shatcher0428

Member
Joined
Oct 17, 2021
Posts
32
Reaction score
21
Do you know anything about the throttle control actuator? Could it be the culprit? I am thinking about replacing throttle body and getting new tca, the only code I am getting is a p0455
 

PNWYukon

Full Access Member
Joined
May 13, 2015
Posts
300
Reaction score
239
Location
Olympia, WA
P0455: Cracks, holes, or splits in EVAP hoses are typically the issue. Could be other things though. The EVAP issue should not cause your dying problems.

It's a 2004, then by all means change out the old parts, but without narrowing it down with some live data or a higher level scan tool, it will be a crap shoot.

 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,149
Reaction score
39,143
Location
Stockton, Ca.
just because the fuel pump is only 2 years old doesn't rule it out.....it's one of the 1st things you want to check before just throwing money at it.
 

Forum statistics

Threads
132,236
Posts
1,864,468
Members
96,785
Latest member
Jack23fcb
Top