05 tahoe low idle/stall

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Lit549

Full Access Member
Joined
Sep 19, 2016
Posts
186
Reaction score
74
I've searched and searched,found a lot of threads related to this but no answers..My 05 tahoe (5.3) has developed a low idle,it happens as I come to a stop..It dips down to about 200rpm but doesn't die,then it clears up and won't happen again for awhile.Fuel pump has 52psi at idle in park.Fuel pump is original.I have cleaned the throttle body and map sensor..No light!I read somewhere it's the throttle body and needs replaced?Anyone have this issue and a answer?Thanks in advance
 
OP
OP
Lit549

Lit549

Full Access Member
Joined
Sep 19, 2016
Posts
186
Reaction score
74
No codes,I did the knock sensors aboutb2 months ago,replace gaskets then..Had no problems till now..I also sprayed around intake and no leaks.
 
OP
OP
Lit549

Lit549

Full Access Member
Joined
Sep 19, 2016
Posts
186
Reaction score
74
No codes,I did the knock sensors aboutb2 months ago,replace gaskets then..Had no problems till now..I also sprayed around intake and no leaks.
 

cmc76

Full Access Member
Joined
Sep 5, 2014
Posts
685
Reaction score
313
i would try the throttle position relearn next. its a series of key cycling, i dont recall the exact procedure though.
 
OP
OP
Lit549

Lit549

Full Access Member
Joined
Sep 19, 2016
Posts
186
Reaction score
74
I'll Google it and try it,I'll post results.
 

01ssreda4

Full Access Member
Joined
Feb 28, 2014
Posts
1,124
Reaction score
487
Id replace the tps if you are just going out on a whim. They will cause funky idle fluctuations like you describe.
 

cmc76

Full Access Member
Joined
Sep 5, 2014
Posts
685
Reaction score
313
i suggested the relearn over throwing parts at it, at least its free. After a relearn, i would try a MAF and TB cleaning.
 

01ssreda4

Full Access Member
Joined
Feb 28, 2014
Posts
1,124
Reaction score
487
There is no reason for a relearn unless something else is wrong. A relearn just sets a low and high voltage to cover the span of 0-100% throttle. If this has changed enough to cause an issue then the sensor is likely failing. A relearn will simply mask it for a while.
 

cmc76

Full Access Member
Joined
Sep 5, 2014
Posts
685
Reaction score
313
true. im talking free and quick until he can scan
 

Forum statistics

Threads
132,697
Posts
1,872,717
Members
97,507
Latest member
eric83
Top