05 Yukon drivers side foot pedal adjustment, seat memory and heated seats don't work

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

InspectahDEck

Member
Joined
Oct 15, 2013
Posts
74
Reaction score
66
All these buttons don't work on the drivers side door panel. When attempting to turn on the seated heats, I hear a clicking sound and the light turns on and off quickly. Any ideas what to check for?
 

MassHoe04

Full Access Member
Joined
Nov 4, 2021
Posts
1,587
Reaction score
2,820
Location
Western MA
Check the ground wires that connect to the body mount bracket under the driver's side. It is in line with the front door hinge behind the rocker panel. Clean wire connectors, bolt and contact area on the chassis with a wire brush. Put back together and make sure the connection secure.

If still acting weird...

You can pull the switches and check wires to see if you are getting proper voltage to the appropriate connector pins on the connector plugs.
 

BatsTDK

Full Access Member
Joined
Apr 7, 2016
Posts
300
Reaction score
272
Location
Orange County, CA
One of your seat heater elements is bad. Very likely the driver's side since it sees the most wear and tear. If the heater element is broken, you will get the symptoms you described above. Mine was doing the same and it was the driver's side that was broken.
 

Forum statistics

Threads
132,714
Posts
1,873,079
Members
97,538
Latest member
Elio_vega

Latest posts

Top