07 custom rear hatch and roll pan

[gettygatz4life]

I looking to do this work to my 2010 Tahoe I need the mod or DIY or where can I go to order the parts to do the work

Where can I find the parts to do this mod



Sent from my SM-G950U using Tapatalk

 

[NeverSatisfied]

No clue on the DIY of this but whatever it is, its going to take a ton of body/fab work. The green and red tahoes are using 07-13 sierra lower valance pieces on the front. The black one is using a 11-14 2500hd silverado lower valance piece. The rear just may be a store bought roll pan molded in really well or it could be a custom piece.

 

[yates ™]

Pretty sure it's all one off stuff. I think most of those were built by Ekstensive Metal Works so you may start there.

 

[Doubeleive]

Just like he says in the video that is all fabricated custom work, you cant buy those parts and if you want that drop you're talking about extensive work to the frame with the body off as well.
all you need is money baby and you can have it done too.

 

[Rocket Man]

eBay has all you need. And Amazon.

 

[05Single]

eBay has all you need. And Amazon.

Don’t forget now they have the Wish app

 

[Doubeleive]

lol

 

[NathanJax]

Where can I find the parts to do this mod

Step 1. Take it to a shop like Extensive https://www.ekstensive.com/

Step 2. Hand them about $20,000.00

Step 3. Wait 4-6 months until complete.

 

[Rocket Man]

Step 1. Take it to a shop like Extensive https://www.ekstensive.com/

Step 2. Hand them about $40,000.00

Step 3. Wait 4-6 months until complete.

Fixed it.

 

[NeverSatisfied]

2 threads for the same question