backlash was .006"The drive side is pretty close, low heel contact, the coast side is spot on. Check the backlash, should be between .003" and .005".
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
backlash was .006"The drive side is pretty close, low heel contact, the coast side is spot on. Check the backlash, should be between .003" and .005".
yeah I'm on the fence. smallest shim I have is .010" which I think would be too much. also don't wanna keep paying to get bearing pressed on/off while guessing.Well, it's your call. You can shim the pinion a hair closer or leave it as is.