Deadpool710
TYF Newbie
- Joined
- Mar 6, 2025
- Posts
- 5
- Reaction score
- 2
07 Yukon Denali car swap - so my question is what all will I need to carb swap my 6.2 and what will I need to make sure my trans shifts correct?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The carb I got for the swap is an efi injected 4 barrel with a sump pumpBefore going to a carb setup, I'd look at ways to make EFI improvements.
With a carb setup I can imagine it will be easier to add boosted applications with minimal tuning effortsWhy downgrade your system? Going drag racing? Summit Racing is your friend.
yeah, that's not really a carb.The carb I got for the swap is an efi injected 4 barrel with a sump pump
I believe it’s a fitech system but I really haven’t dug into it. Figured this would be the best place for direction and knowledgeyeah, that's not really a carb.
you got the sniper system?
usually guys would go with a holley system of some sort. they should offer something with tranny control and replace the dash gauge cluster with their monitor setup.
basically gut the truck of factory wiring, install all aftermarket harness for engine, trans and dash. try to leave enough chassis harness for headlights and stuff.
Fitech are garbage systems. I've heard so many horror stories on different C10 and T/A forums. Way more bad stories than good. If you really want to EFI Swap look into Aces or a Holley. The newer Holley systems fixed a lot of the problems you hear about their EFI Setups.I believe it’s a fitech system but I really haven’t dug into it. Figured this would be the best place for direction and knowledge
I believe it’s a fitech system but I really haven’t dug into it. Figured this would be the best place for direction and knowledge