id say this thing is cursed...but its not like there has been dead bodies in it for the past 10 years or anythi.....
Probably got disabled when the death strobes were installed.
07Burb’s 09 Deathscalade Non-Build
- Thread starter 07Burb
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Probably got disabled when the death strobes were installed.
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,345
- Reaction score
- 17,117
Well, if I hasta choose between cruise and the dead parade lights I'm keeping the lights
mikeyss
Full Access Member
My Tahoe did this too, and it was the brake switch above the brake pedal. My brake lights did work with the old switch, but my cruise did not work. I replaced the switch, and my cruise worked again.Had that thought, too, but my brake lights come off and on like you'd expect when the brake pedal is depressed and let off
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,345
- Reaction score
- 17,117
Really? Well alright. I’ll give it a try and see what happens. Wonder what about the switch fails where the lights still work but not cruise
that’s interesting
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,345
- Reaction score
- 17,117
Ordered. Should be here tomorrow and I’ll swap it out as soon as it arrives
randeez
Full Access Member
did you top off the cruise control fluid?Ordered. Should be here tomorrow and I’ll swap it out as soon as it arrives
Really? Well alright. I’ll give it a try and see what happens. Wonder what about the switch fails where the lights still work but not cruise
Didn't want to listen to me huh?
I think the brake lights work off a reading of the brake fluid pressure somehow. Easy test is to just unplug that switch and see if your brake lights still light up. You can do it in your comfy garage in slippers, now man up and do it. Remember the key needs to be on too. And report back what you find.
mikeyss
Full Access Member
I blame the gremlins inside the brake switch!!
@07Burb probably wouldn't hurt to check the switch on the parking brake pedal too while under there, just vacuum or blow it out. Preventive maint. Remember mine?
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Yeah climbed under there tonight to check out the parking brake switch. It should look something like this if I'm not mistaken. That’s the one. Yeah climbed under there tonight to check out the parking brake switch. It sure is buried deep in there. Also can’t believe how much lint is stuck...
www.tahoeyukonforum.com
Similar threads
