2/2 On 2DR 4x4, Help!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BennyR72

Member
Joined
Jun 16, 2010
Posts
50
Reaction score
3
Location
Los Angeles, CA
Trying to figure out how to get a 2/2 drop on my 96' 4x4 2DR hoe. I've got the front figured out with lowering keys and was planning on using shackles for the rear but I've been told the most you can get out of shackles is 2" because of the fuel tank nozzle, heard it might be possible to mod the hangers off a 4DR to do it.

Anyone out there done this or have any ideas?

Thanks.
 
Last edited:

Arctic-Rodz

Full Access Member
Joined
Feb 23, 2010
Posts
590
Reaction score
16
Location
RGV Texas
if you want a 2/2 drop you already figured it out. drop shackles will give you the 2" rear drop you want. anything after that im not sure
 

Da90

Full Access Member
Joined
Jun 16, 2009
Posts
736
Reaction score
815
Location
Tulsa, OK
If your wanting more than a 2" drop in the rear you have to go with spring hangers or a flip kit. Shackle hanger kit will give you a 4" drop. If you did a 2/4 drop on yours it would sit level.
 

718frankb

LOCAL 282 TEAMSTERS
Joined
May 10, 2009
Posts
172
Reaction score
0
Location
BROOKLYN,NY
front = belltech keys, rear = belltech drop leaves and 2 in shackles
all you have to do for the filler tube is strap it up to the trunk floor
you will get a 3/5 drop like that without a c-notch,but do remove the rear bumpstop brackets
 

TOWRIGG

Full Access Member
Joined
Feb 13, 2010
Posts
87
Reaction score
0
Location
BX. NEW YORK
just did my 94 2dr....keys in the front 1-3 inches..and beltech #6700 for the rear...didnt quite bring the rear down enuff for me so im going to #6400..on factory hangers..
 

Forum statistics

Threads
132,113
Posts
1,862,493
Members
96,599
Latest member
20DENALI07
Top