2000 Yukon SLT Pigtail Harness Diagrams - Chiltons/Haynes Electrical Service Manual NEED HELP !!! 24 pin Wiring Harness’s and 9 pin Harness

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WorkCon

TYF Newbie
Joined
Jan 9, 2024
Posts
5
Reaction score
0
NEED HELP !!! 24 pin Wiring Harness’s and 9 pin Harness
These are all messed up and not connected properly. Also need PCM diagram pinout diagram for 2000 GMC Yukon (New Body style) with Amp NO BOSE Stereo

Thank You
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
11,728
Reaction score
23,829
Location
Elev 5,280
You'll likely get better responses if you detail which harness connectors are in play, apart from the PCM connectors.

Might want to subscribe to AllDataDIY or similar.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,009
Reaction score
38,815
Location
Stockton, Ca.
NEED HELP !!! 24 pin Wiring Harness’s and 9 pin Harness
These are all messed up and not connected properly. Also need PCM diagram pinout diagram for 2000 GMC Yukon (New Body style) with Amp NO BOSE Stereo

Thank You
you'll probably have better luck searching 2001 or even 2002
2000 was a year they made obs & nbs, so much mixed info out there, searching a later year is always a better option.
just keep in mind changes were made in 2003 so that can lead you wrong as well.
not sure what you are trying to accomplish, the base gm radio amp is behind the glove box.
a good point of reference may be a junk yard for a hands on look for correct wiring. you could even cut out what you need or take pictures.
 
Last edited:
OP
OP
W

WorkCon

TYF Newbie
Joined
Jan 9, 2024
Posts
5
Reaction score
0
you'll probably have better luck searching 2001 or even 2002
2000 was a year they made obs & nbs, so much mixed info out there, searching a later year is always a better option.
just keep in mind changes were made in 2003 so that can lead you wrong as well.
not sure what you are trying to accomplish, the base gm radio amp is behind the glove box.
a good point of reference may be a junk yard for a hands on look for correct wiring. you could even cut out what you need or take pictures.
Yeah I was thinking that same thing but don’t live close to one that might have one. And if so not modified already. Seen lots that have might just have to go buy a manual
 

Hobert

Full Access Member
Joined
Jan 6, 2019
Posts
256
Reaction score
558
Location
Downers Grove, IL

Forum statistics

Threads
132,051
Posts
1,861,592
Members
96,504
Latest member
Steeveyukk

Latest posts

Top