2002 Tahoe LT 5.3L ABS Wheel Speed Sensors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JimmieT

TYF Newbie
Joined
Aug 25, 2021
Posts
3
Reaction score
0
Location
Trevor, WI
New to the forum, lots of great post! So I went to pull the front ABS wheel speed sensors on my 2002 Tahoe, that I bought a few weeks back, due to the ABS light always coming on shortly after starting. The problem is the bolts that hold the sensors in are completely rounded out. I can’t get anything to bite. I was wondering if anyone knew the actual size of bolts (thread/length), so I can just extract and replace? Thanks for your time!
 

mattbta

Full Access Member
Joined
Jun 19, 2012
Posts
1,107
Reaction score
2,043
Location
Frisco, TX
How many miles? Might be time/easier to replace the entire hubs with some Timkens.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,369
Reaction score
9,989
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

Other more knowledgeable folks then me on this Forum will chime in.
 

corvette744

2004 Z-71
Joined
Jul 11, 2017
Posts
739
Reaction score
769
Location
Northern illinois
If you havent or previous owner has not changed the hub bearing assy i would do that for sure.Would suck to have to go back in it to change them again.If you can take back your sensors and get your money back i would order new hubs come with the sensors in 4wd or rwd.https://www.partsgeek.com/ss/?ssq=timken&make=chevrolet&year=2002&model=Tahoe Shop around online seen them for 81 bucks on ebay Shipped to your door.
 

Teamiez

Full Access Member
Joined
Oct 10, 2016
Posts
306
Reaction score
392
How many miles? Might be time/easier to replace the entire hubs with some Timkens.
100% agree, my light came on around 150,000 I think and tried just the sensors, turned out to be the wheel bearings tripping the light. Never knew those hubs were that fancy. Ended up doing 2 jobs and wasting money.
 

Hobert

Full Access Member
Joined
Jan 6, 2019
Posts
258
Reaction score
569
Location
Downers Grove, IL
If you haven't or previous owner has not changed the hub bearing assy i would do that for sure. Would suck to have to go back in it to change them again. If you can take back your sensors and get your money back i would order new hubs come with the sensors in 4wd or rwd.https://www.partsgeek.com/ss/?ssq=timken&make=chevrolet&year=2002&model=Tahoe Shop around online seen them for 81 bucks on ebay Shipped to your door.
Same here my 2001 Yukon XL front hubs replaced twice for same issue. 1st set around 130,000mi 2nd at around 240,000mi
 

Forum statistics

Threads
132,436
Posts
1,868,131
Members
97,115
Latest member
sher
Top