2002 tahoe suspension

[bowdown916]

torsion bar...

 

[bowdown916]

sorry if the pics don't come out good..

 

[bowdown916]

are those plastic stoppers should be that close? they touching the control arms..

 

[Oleblack03]

That looks like that is the problem right there, your hitting your bump stops, that will cause your harsh ride for sure

 

[bowdown916]

I guess last owner lowered the truck, but it dosent seen that low to me,i guess it used t be way higher.. how can I raise it up little, I don't see new spindles or anything else new on the front but those blue shocks..

 

[Oleblack03]

Raise your torsion bars, it looked like the bolts were backed way out, is the rear lowered?

 

[bowdown916]

Can't tell on the back, it has the stock shocks and the springs looks old.. I'll take pics of the back too..

---------- Post added at 07:50 PM ---------- Previous post was at 07:49 PM ----------

Do you know where the key bolts suppost to be at stock height?

 

[bowdown916]

 

[bowdown916]

 

[bowdown916]

so to raise it up I gotta bolt in right? can I do one side at a time or both sides needs to be on the air?