2004 6.0 NV4500 Tahoe

[Dantheman1540]

I’m so mad right now I can hardly see straight. This is officially the 4th time this line has leaked right here. What in the phuck is causing this? This is the third OEM line and it is welded this time. It’s lasted about 6 months since I’ve welded it and yes it leaked just a few weeks ago but that was from a different spot and caused by a bad seal. I’m beyond pissed off and honestly on the verge of selling this thing.

 

[randeez]

I’m so mad right now I can hardly see straight. This is officially the 4th time this line has leaked right here. What in the phuck is causing this? This is the third OEM line and it is welded this time. It’s lasted about 6 months since I’ve welded it and yes it leaked just a few weeks ago but that was from a different spot and caused by a bad seal. I’m beyond pissed off and honestly on the verge of selling this thing.

you have more ac problems than anyone i know

 

[Dantheman1540]

you have more ac problems than anyone i know

I’m gonna put a go pro under the hood and see if the motors flopping like a fish. It looks fine when sitting still but maybe on those clutch dumps it’s getting jiggy

 

[randeez]

i can set you up with some adapters and a hose if you want to get away from those peanut ends

 

[Dantheman1540]

That connects directly to the compressor, how would the adapters work?

 

[randeez]

That connects directly to the compressor, how would the adapters work?

changes over to hose with oring hose ends, one of these (bigger one) goes onto compressor with stock type sealing washer

 

[randeez]

not sure what the other side looks like on the drier but theres an adapter to change it over also

 

[Dantheman1540]

changes over to hose with oring hose ends, one of these (bigger one) goes onto compressor with stock type sealing washer
View attachment 380045

View attachment 380046

Whoa that’s nice, where do I buy them? Or do you have a full kit

 

[randeez]

Whoa that’s nice, where do I buy them? Or do you have a full kit

i know i have an extra fitting for the compressor, let me see if i have the one for the drier (looks the same as mine and i planned on using the stock one at one point)

you have only front ac? or rear also - cause thatll complicate thinge

 

[Dantheman1540]

i know i have an extra fitting for the compressor, let me see if i have the one for the drier (looks the same as mine and i planned on using the stock one at one point)

you have only front ac? or rear also - cause thatll complicate thinge

It’s got rear as well, I think I’m gonna try a few more things before I try to actually build a new line. I’ve never seen anyone else have these issues so something is not right and causing it.

First will be to remove and inspect the line better, it’s possible my weld failed or cracked.

Then I’ll go pro under the hood to see how much that thing moves. If it moves a bunch I have Atomic poly mounts on the shelf.

If that fails as well then new custom line it is.