2004 Chevy Tahoe - Driver side front tire - sounds like it is grinding when I lift th

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dparkhouse

TYF Newbie
Joined
Feb 19, 2013
Posts
1
Reaction score
0
2004 Chevy Tahoe - Driver side front tire - sounds like it is grinding when I lift the tire and spin the wheel by hand. This morning, leaving my house I heard a clunk noise.
I immediately stopped and check for anything broken or hanging down (it sounded like something broke), but I couldn't see anything. When I started driving (slowly) again. I could hear a scraping sound and it felt like the brakes were sticking... I added a little gas and as the Tahoe moved, it felt like the momentum "broke" lose the brakes. I stopped and check the outside of the Tahoe again, but nothing.
I check the brakes and they worked just fine. When I started moving again (under 5mph), it would happen again. I can shift to drive and take my foot off the brake pedal and the Tahoe would roll forward about 5 feet then stop (as if I pressed the brake pedal). When I would give it some gas, it would "break" loose and then I would roll another 5-10 feet and then it would "brake" again.
Any ideas?
 

Hyper_Tahoe

TYF Newbie
Joined
Jun 3, 2009
Posts
18
Reaction score
0
Location
NJ
When I first read your post I thought it could be a bad wheel/hub bearing but now I am wondering if you have a frozen/stuck caliper.
 

custom99

Member
Joined
Feb 16, 2011
Posts
57
Reaction score
1
Location
Pittsburgh, Pa
I agree with the caliper hanging up. My F-350 had the same symptom and thats what I found to be wrong with it. I replaced it and all went back to normal.
 

TexasTruck

TYF Newbie
Joined
Aug 26, 2013
Posts
3
Reaction score
0
Same boat

I had similar symptoms. Grinding noise, nothing looks bad. Even though the noise sounded like it came from the driver's side, it turned out to be on the passenger side. Wheel hub bearings shot. I found out by applying breaks in a corner and the wheel nearly fell off. Hope you are OK.
:Frustrated:
 

Forum statistics

Threads
132,092
Posts
1,862,319
Members
96,564
Latest member
gmdehart

Latest posts

Top