2004 Yukon.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fye456

TYF Newbie
Joined
Jul 5, 2021
Posts
16
Reaction score
14
Hi there, I am looking at purchasing a 2004 Yukon with 83,000 miles. For it being that old it is in pretty nice shape for a Minnesota vehicle. My question is the frame still has spots that still have the factory GM coating on it.

Is there any areas on this I should be looking at that are known for rotting on the frame? Or any other things in general I should keep a eye on?

Thanks for your time.
 

S33k3r

Full Access Member
Joined
Aug 14, 2017
Posts
2,522
Reaction score
3,478
Location
Dallas, Texas
As far as I know, nothing special about the frame. As always, make sure the weld spots are good/not bubbling. It's mostly body damage you see that you might want to take a close look at.
 

Bigkevschopshop

Full Access Member
Joined
May 5, 2019
Posts
814
Reaction score
2,042
Location
Northside H-Town
Sounds like it almost was a summer vehicle.... Thats low miles for sure...

Frame, check everywhere that is a spot to collect standing water, I think spare tire mount can hold a bit up there, probably bumper bracket and attachment points... cab mounts are flat and can hold water a bit... Like said above, check welds for sure... Check all suspension mounting points etc...

Sounds like you found a gem up there in the land of salt on roads...
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
20,826
Reaction score
36,961
Location
Willamette Valley
Welcome to the forum from Oregon.

I would just crawl under there and look at EVERYTHING, should be done before driving. If you have a working knowledge of what to look for, go for it. If not, then take to a trusted shop and have them inspect. If the seller has nothing to hide, they should allow it.
 
OP
OP
F

Fye456

TYF Newbie
Joined
Jul 5, 2021
Posts
16
Reaction score
14
Here are some pictures. Those are the worst spots on the frame. I will check it with a hammer.
 

Attachments

  • adb1fb6a-b6f1-40e9-9633-009a9e5dc668.jpg
    adb1fb6a-b6f1-40e9-9633-009a9e5dc668.jpg
    79.1 KB · Views: 9
  • 873d919d-1bc6-4f73-a14f-b7e671dec17b.jpg
    873d919d-1bc6-4f73-a14f-b7e671dec17b.jpg
    95.9 KB · Views: 9
  • 4417461f-57a5-4ac0-b12b-d95134ce22ec.jpg
    4417461f-57a5-4ac0-b12b-d95134ce22ec.jpg
    82 KB · Views: 9
  • 10144d05-87c9-4008-b523-c8c9d5bfec52.jpg
    10144d05-87c9-4008-b523-c8c9d5bfec52.jpg
    100.1 KB · Views: 9

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
20,826
Reaction score
36,961
Location
Willamette Valley
Lots of surface rust and even some eaten a bit it looks like. I would go over that thing with a mirror and flashlight and pick it a part.

Sorry, but I gotta say that I expected better than what the pics show.
 

Forum statistics

Threads
132,453
Posts
1,868,486
Members
97,154
Latest member
janabanana

Latest posts

Top