2005 Tahoe. 3.42 to 4.10 gears. Will speedo need calibration?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Broncodave93

TYF Newbie
Joined
Jun 28, 2021
Posts
2
Reaction score
1
2005 Tahoe LS

wondering if my speedo will be effected. and if so, how can I recalibrate it?

Will probably swap to a 9.5 semi-float from on 08 avalanche. then rebuild and re-gear my front diff.

Thanks! Dave
 

rockola1971

Full Access Member
Joined
Dec 29, 2016
Posts
2,605
Reaction score
3,512
Location
Indiana (formerly IL)
Without a doubt speedo and transmission shift data will all need to be recalibrated. Your speedo is fed a signal via sensor that monitors the TRANNY TAILSHAFT speed. Your true (not measured) speed is being changed at the differential when you change gear or rim/tire sizes so this tailshaft sensor has no idea how fast your axles are turning. Things would be so much easier if GM would just stick the sensor on an axle or the differential for the speedo and use a separate one for transmission data.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,607
Reaction score
26,320
Location
Treasure Coast, Florida
Without a doubt speedo and transmission shift data will all need to be recalibrated. Your speedo is fed a signal via sensor that monitors the TRANNY TAILSHAFT speed. Your true (not measured) speed is being changed at the differential when you change gear or rim/tire sizes so this tailshaft sensor has no idea how fast your axles are turning. Things would be so much easier if GM would just stick the sensor on an axle or the differential for the speedo and use a separate one for transmission data.
GM did that on the 900s but speedo is still driven from trans/transfer case and not wheels.
 

Forum statistics

Threads
132,365
Posts
1,866,773
Members
96,987
Latest member
Chineyfari
Top