Might be posting this in the wrong section since this is not a z71. Just bought a 2005 yukon denali with the autoride suspension. Would like to level the front end out with the ford keys. 2 inches max in the front. Will i need to relocate the suspension sensors on the front due to the lift?
2005 yukon awd leveling question
- Thread starter saturn
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
samtman18
Full Access Member
im not familiar with autoride suspension but a have a set of lift keys and shock extenders that i bought b4 lifting my z71(already leveled and had lift keys in it from previous owner) this is what i bought, i only used the rear spacers since i replaced all shocks http://www.ebay.com/itm/170567278741?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
if you want to buy for $60, let me know. i was able to get up to 2.5" more lift with my keys so these ones will work.
if you want to buy for $60, let me know. i was able to get up to 2.5" more lift with my keys so these ones will work.
brucebruce45
Full Access Member
- Joined
- Jun 30, 2009
- Posts
- 528
- Reaction score
- 66
IMO I wouldn't crank an awd vehicle any more than necessary if at all. Being the front pulls all the time.
Look to see if their are ball links attached to the front a-arm. They censors are used to control the shock fluid viscosity as a function of the ride control. The rear serve the ride height and the ride control,"If I understand it correctly."
