2007 GMC Yukon XL 2500

[avalonandl]

Yes, 3.73. Most came with that. I been looking for one like that. Up here in Mich they seem to be all rotted out......

 

[Nap73]

Yes, 3.73. Most came with that. I been looking for one like that. Up here in Mich they seem to be all rotted out......

I know most are tore up or not optioned correctly. Been looking for a clean one for a few Months. Finally found it.


Sent from my iPhone using Tapatalk

 

[09Tahoe4Now]

Wow! Looks very clean for the mileage and you couldn’t tell by looking at her!

GS3/GT4=3.73 or GT5/GT8=4.10

 

[avalonandl]

The last 2500 I looked at was a complete POS. Rusted tailgate, one corner actually missing and they wanted 15k....... OMFC

 

[Nap73]

Wow! Looks very clean for the mileage and you couldn’t tell by looking at her!

GS3/GT4=3.73 or GT5/GT8=4.10

You can see it was really taken care of. Surprisingly it’s from Massachusetts & there is very little surface rust on the frame. Was looking for less miles but for the age it’s to be expected.


Sent from my iPhone using Tapatalk

 

[Nap73]

You can see it was really taken care of. Surprisingly it’s from Massachusetts & there is very little surface rust on the frame. Was looking for less miles but for the age it’s to be expected.


Sent from my iPhone using Tapatalk

Thanks for the codes to Man


Sent from my iPhone using Tapatalk

 

[swathdiver]

I got the 2500 because the deal was just to good to pass up. Trucks extremely clean , 3 owner good carfax and a normal price. All that equals “buy immediately”

I tow occasionally but nothing crazy

Not sure about the 3.73 or 4.10 gears. How do I know ? What’s more desirable?

You can select 2 , Auto , 4


Sent from my iPhone using Tapatalk

I think those 2007s should have a 2-speed transfer case with neutral also. With 3.73 gears they are rated to tow 7400 pounds and a GCWR of 14K pounds. 4.10s takes them up to 9400 and 16K pounds and 1410 u-joints.

All of your options and things about your truck are on the RPO sheet in the glovebox. You can email or chat with GM and they'll send you a breakdown about what each means if you send them the VIN.

 

[Nap73]

I think those 2007s should have a 2-speed transfer case with neutral also. With 3.73 gears they are rated to tow 7400 pounds and a GCWR of 14K pounds. 4.10s takes them up to 9400 and 16K pounds and 1410 u-joints.

All of your options and things about your truck are on the RPO sheet in the glovebox. You can email or chat with GM and they'll send you a breakdown about what each means if you send them the VIN.

Thanks for the info

Appreciated

I’m on the GMC site now chatting with a rep. I’ll let you know how it goes.


Sent from my iPhone using Tapatalk

 

[bondservant2]

Are these numbers correct....?
I know the 2001-2006 w/8.1L were rated up to 14k....and the limiting factor on the 2007-2013 was the hitch rating..... plus no more big block after ‘06....

 

[gooffeyguy]

Truck is in amazing shape for its age. Really for any age. Including the interior. Only thing I would do is freshen up the driver's side seat bottom and lose the fake wood grain.

Not really sure what direction id like to go with the truck. I kind of like the clean stock look of it now. Maybe some more aggressive tires. Guys sending me the original mirrors and Im probably going to put those back on .





Sent from my iPhone using Tapatalk

Do the tow mirrors that are on it power fold or are they manual?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18