2008 Hybrid Yukon Sound when gas is applied

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joelbbvette

TYF Newbie
Joined
Jun 8, 2019
Posts
1
Reaction score
0
My 2008 Yukon Hybrid has just over 100K. Started doing the following and looking for help. When first starting, have to wait for transmission to build pressure before truck will move forward. Also under constant acceleration or gas is applied, getting a warbling sound that might be coming from transmission pump. Basically goes away after removing pressure from gas pedal. Any suggestions appreciated.
 

j91z28d1

Full Access Member
Joined
Feb 28, 2022
Posts
3,018
Reaction score
3,729
I'm no transmission guy.. but have you checked the fluid and do you know the last time the fluid and filters were changed?

on the hybrid side. have your tried driving it in M4 mode and see if it acts the same way? these have an electric pump that runs when the engine is in auto stop and there's some tsb's about them and upgrade done along the way. but if the engine is running, that pump isn't used.

there is a gauge port on the side of the tranny that you can put a mechanical gauge on to real line pressure. I've never done it, only saw it in a manual. I've not found anything on any scanner that shows line pressure.
 

Zylin

TYF Newbie
Joined
Jul 15, 2014
Posts
8
Reaction score
2
My 2008 Yukon Hybrid has just over 100K. Started doing the following and looking for help. When first starting, have to wait for transmission to build pressure before truck will move forward. Also under constant acceleration or gas is applied, getting a warbling sound that might be coming from transmission pump. Basically goes away after removing pressure from gas pedal. Any suggestions appreciated.
Joel,

Any updates? My daughter has our 2008 and is describing the same thing.

Thanks
 

j91z28d1

Full Access Member
Joined
Feb 28, 2022
Posts
3,018
Reaction score
3,729
just some info I had saved for someone else.

but honestly, if you haven't, always check the hybrid battery condition first.(meaning log cell voltage under load) these batteries were designed for a prius and just added some extra cells for higher voltage. the cooling isn't up to the weight of the truck and it's old school nickel metal hydride battery chemistry. wasn't very good when new. throw in they still have most of the standard problems the gmt 900s are know for, they can be a bit of a hand full.

since their aren't any good mechanics these day, only parts swapers, and these trucks are actually time consuming to troubleshoot. most people have bad luck at shops with these.
 

Attachments

  • PXL_20230117_194640157.jpg
    PXL_20230117_194640157.jpg
    274.8 KB · Views: 2
  • PXL_20230117_194629578.jpg
    PXL_20230117_194629578.jpg
    216.3 KB · Views: 2
  • PXL_20230117_194625515.MP.jpg
    PXL_20230117_194625515.MP.jpg
    244.2 KB · Views: 1
  • PXL_20230117_194618048.jpg
    PXL_20230117_194618048.jpg
    271.5 KB · Views: 1
  • PXL_20230117_194551936.jpg
    PXL_20230117_194551936.jpg
    191.4 KB · Views: 2

BG1988

Full Access Member
Joined
Nov 14, 2018
Posts
2,954
Reaction score
1,346
My 2008 Yukon Hybrid has just over 100K. Started doing the following and looking for help. When first starting, have to wait for transmission to build pressure before truck will move forward. Also under constant acceleration or gas is applied, getting a warbling sound that might be coming from transmission pump. Basically goes away after removing pressure from gas pedal. Any suggestions appreciated.
AUX transmission pump... most likely
 

Forum statistics

Threads
132,026
Posts
1,861,220
Members
96,472
Latest member
lpadron1
Top