OP
OP
Ryan1126
Full Access Member
- Joined
- Oct 29, 2011
- Posts
- 255
- Reaction score
- 0
thanks!
2008 Silverado Build
- Thread starter Ryan1126
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Regency
Supporting Member
- Joined
- Dec 14, 2011
- Posts
- 5,093
- Reaction score
- 664
Don't know how I missed this!
Any updates?
Any updates?
OP
OP
Ryan1126
Full Access Member
- Joined
- Oct 29, 2011
- Posts
- 255
- Reaction score
- 0
yeah sorry. Got the SQ-500 and SQ-945 in, have to build something to get the second pair of Dayton mids in, and found out 2 Vifa tweets wont be enough, good thing i made baffles on my pillars big enough for 2 on each side. So im gonna swap the SQ-500 for a SQ-475 to run the 4 Vifa's.
My M2.5k ended up being thrsashed from getting dropped in shipping so i am running all 4 15's on a AB ph2500 for temporary so they are all seeing like 175 watts each right now... lame as hell. But until i can afford a $700 VFL200.1 the PH2500 will have to do. It still gets fairly loud and makes my exhaust rattle something awful, no videos until i get the power i want in there. Box is 16cuft@31Hz and was a ***** to get in, i measured about an inch too big for the depth and we almost weren't able to flip it so the subs would face up. thought i was gonna have to run it facing forward for a minute. Still lots more work coming, lots of trim and interior beautifying coming up. Just wanted to be sure it was gonna fit before i put a bunch more work into it. got a show to go to this weekend then after that i will have plenty of time to rip it all out and clean it all up and swap the amps and what not.
My M2.5k ended up being thrsashed from getting dropped in shipping so i am running all 4 15's on a AB ph2500 for temporary so they are all seeing like 175 watts each right now... lame as hell. But until i can afford a $700 VFL200.1 the PH2500 will have to do. It still gets fairly loud and makes my exhaust rattle something awful, no videos until i get the power i want in there. Box is 16cuft@31Hz and was a ***** to get in, i measured about an inch too big for the depth and we almost weren't able to flip it so the subs would face up. thought i was gonna have to run it facing forward for a minute. Still lots more work coming, lots of trim and interior beautifying coming up. Just wanted to be sure it was gonna fit before i put a bunch more work into it. got a show to go to this weekend then after that i will have plenty of time to rip it all out and clean it all up and swap the amps and what not.
Last edited:
diamondbackjo
Full Access Member
holy 
OP
OP
Ryan1126
Full Access Member
- Joined
- Oct 29, 2011
- Posts
- 255
- Reaction score
- 0
might go take a video today and get some more pictures of it before i take it all out to make it pretty and swap equipment
