2012 GMC Yukon Denali On 26" Rubbing Issue

[DenaliDenis]

I have 26" KMC Slides On My Truck. They are on 305/35 tires.

They rub when the wheel is about 1/4 turn. Does anyone have any tips on what to trim or use a mallet on?

Please help as this is annoying and don't want to have to make million point turns to turn around etc etc...

 

[NathanJax]

You can heat the plastic up depending on where it's rubbing.

 

[DenaliDenis]

Heat it up then what?!

 

[NathanJax]

Heat it up then what?!

while it's heating up you push the plastic inward (away from where it's touching)

 

[gryans07yukon]

With 28s I had to cut away some of the bracets at the bottom of fender wheel. . After cut dont make a sound or rub at all

 

[08grey]

^^^^ pics

 

[gryans07yukon]

The brace at the bottom of fender behind fender well.

 

[DenaliDenis]

Do you have any pictures of the brace you cut and how you cut it?

 

[GalaxyBlackEsky]

Are you lowered or anything? I had 26" slides on my old Tahoe with it lowered and it rubbed a little. But if you are at stock height and rub I want to say it could be the offset on the rims.

 

[gryans07yukon]