2012 Yukon Norcal SS 2/3 kit on 22's

[sbubbaklein]

looks nice

 

[KMeloney]

Found some of the G5 Escalade tail lights on EBAY. Any other recommendations on where to get them? Are they plug & play, or do I need a special harness?

If you get the aftermarket lights, they're plug-and-play. If you go with the actual Esky lights, you'll need a modified Esky harness.

 

[NORCAL SS]

what does it measure all the way around from ground to fenderlip?

34.25 front and 35.5 rear?

 

[01yukon]

Looks good, doesn't get much better. Can't wait to get mine on the Lac!

 

[guy from norcal]

Looking real good

 

[HigherPower]

what does it measure all the way around from ground to fenderlip?

34.25 front and 35.5 rear?

I got 33.75 front and 34.75 Rear. Right down the center of the wheel ground to fenderlip.

 

[guy from norcal]

I got 33.75 front and 34.75 Rear. Right down the center of the wheel ground to fenderlip.

Thats pretty good. Im looking to get 33" front and 34-35" in rear using belltech spindles and adjustable struts.

 

[HD4]

Looks Good!

 

[NORCAL SS]

Thats pretty good. Im looking to get 33" front and 34-35" in rear using belltech spindles and adjustable struts.

Depends on what springs were used from gm in front. There can be up to 1 inch variance on them. My esclade was 36.75 and 38.5 stock on 285 45 22. Now im at 33 and 33.25 on 295 30 26

 

[guy from norcal]

mine now measure 36" front and 38 1/4 rear. I am not sure if the belltech struts are a true 1- 2 " drop with spindles or not ?