2013 Suburban About To Follow Me Home

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bobsburban

Full Access Member
Joined
Aug 19, 2020
Posts
130
Reaction score
272
Bought a truck for our 46th anniversary. Found a 2013 black on black leather 2500 from an older Florida couple who had it since new. Used it to tow a boat to and fro, so there's some surface rust here and there which I'll get cleaned up. 200k miles, runs out fine, no issues. I'll pick it up tomorrow afternoon and swap some stuff over from my 1500 - like the ARB air compressor, perhaps the big radiator if it fits, etc. Will get fluids and stuff changed after the first of the month and see what other maintenance needs are present. Pretty sure that tires will be coming around before winter. The K02s that are on it have a little life left but not a ton.

Going to keep the 1500 for a few weeks and make sure this new one is good and then really get to work on it between now and next year.

Pix after I get it cleaned up.
 

Airman68

Member
Joined
Jul 26, 2022
Posts
88
Reaction score
156
Location
Kaukauna, WI
I dont see many 2500's up here (WI). Is the 2500 rear suspension any different than the 1500? I have a 2008 1500 XL and I tow a #5000 boat with air bags but it could be better.
 

intheburbs

Full Access Member
Joined
Aug 10, 2017
Posts
856
Reaction score
1,618
Location
SE MI
I dont see many 2500's up here (WI). Is the 2500 rear suspension any different than the 1500? I have a 2008 1500 XL and I tow a #5000 boat with air bags but it could be better.

Most folks mistakenly think the 2500 is simply a "beefed up" 1500. It's not. Remove the body, and what's left are two completely different trucks. Literally.

The GMT900 2500 trucks actually carried over the GMT800 frame and running gear - torsion bar front suspension, leaf springs rear and no rear swaybar.

The 2500s are so awesome because
1) They were never made in high volumes, so GM just raided its parts bins using known/durable components, which in some cases was total overkill like the 10.5" rear axle.
2) Because their GVWR was 8600 lbs, that made them exempt from government/state CAFE/mileage requirements, so they never got the stupid stuff like AFM.
 

Airman68

Member
Joined
Jul 26, 2022
Posts
88
Reaction score
156
Location
Kaukauna, WI
I would actually prefer the GMT800's but I can't find any up here that aren't totally rusted to crap. I think the rear leafs would make for much better towing, IMO. What engine does it have, 6.0?
 
OP
OP
bobsburban

bobsburban

Full Access Member
Joined
Aug 19, 2020
Posts
130
Reaction score
272
I would actually prefer the GMT800's but I can't find any up here that aren't totally rusted to crap. I think the rear leafs would make for much better towing, IMO. What engine does it have, 6.0?

Yes, the 6.0. Hoping to get pix tomorrow. Been really rainy and not expecting it to let up much but we shall see.
 
OP
OP
bobsburban

bobsburban

Full Access Member
Joined
Aug 19, 2020
Posts
130
Reaction score
272
So the skies parted long enough to mow the lawn and snap a photo. Black on black (leather) with drug dealer (or secret service - who ya wanna be associated with?) tint. Hope to get more after I get it cleaned up a bit. And it quits raining.
 

Attachments

  • IMG_3866.jpg
    IMG_3866.jpg
    555.4 KB · Views: 12

stubbs

TYF Newbie
Joined
Aug 12, 2020
Posts
17
Reaction score
9
Nice truck! Looks like those are probably 285/70R17s (33s) on the H2 wheels, so you've got a mild lift too. At minimum cranked front torsion keys but it looks similar to mine that I've lifted about 2" front and rear and still had to do some trimming and front fender liner reshaping to not rub.IMG_5529.JPG
 

Forum statistics

Threads
132,376
Posts
1,867,003
Members
97,012
Latest member
Roscoe2352

Latest posts

Top