2013 Yukon Denali coil springs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Austin12

TYF Newbie
Joined
Apr 11, 2025
Posts
3
Reaction score
0
I have a 2013 yukon Denali and as of now it’s stock coil springs with the air ride shocks I beleive there a little worn when the truck sits in the driveway it sets about 3” lower in the back I do have a 2.5” leveling kit that been on for years but when I bought it it nose dived 3 inch’s. but I’m thinking of doing a rear air shock delete and installing heavy duty springs. Anybody done this? If so any ideas opinions and pictures would help
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
8,058
Reaction score
11,169
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

When you say a 2.5" leveling kit installed, is this kit on the front suspension? If your active suspension is working correctly, the truck should self level, and I'm getting the impression from your text that the truck is not level.

Can you provide some additional clarification?

Note that you can get stiffer/stronger rear springs by ordering the OEM 'non-Denali non-active suspension' rear springs.
 
OP
OP
Austin12

Austin12

TYF Newbie
Joined
Apr 11, 2025
Posts
3
Reaction score
0
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

When you say a 2.5" leveling kit installed, is this kit on the front suspension? If your active suspension is working correctly, the truck should self level, and I'm getting the impression from your text that the truck is not level.

Can you provide some additional clarification?

Note that you can get stiffer/stronger rear springs by ordering the OEM 'non-Denali non-active suspension' rear springs.
The 2.5 leveling kit is on the front struts and no the auto leveling does not work anymore. I’m wanting to delete all the shocks and install resistors but I’m not sure on what to do to delete the auto leveling in the back as my air compressor has recently stopped working
 
Top