2014 PPV - Belltech 25004 strut replacement parts list

[ppvfan]

I decided to replace my original 2014 PPV struts. I was getting some unpleasant rebounding after bumps and they were rusty as heck.

Here is a parts list for anyone looking to do the same thing. (The springs weren't replaced)

Struts - Belltech 25004 - 5 rings matched the original ride height.

Strut mounts - Monroe 905910 Strut Mate - includes the strut mount and the front spring upper seat.

Coil spring insulator - KYB SM5717 - these were probably okay but why not

Coil Spring Seat/Insulator - MOOG K160311 - I could feel that the original ones were cracked

I took it to a spring/suspension shop and it was 2 hours labour to remove and install everything. Thanks to everyone who helped me decide on these struts.

 

[Jerryrich0806]

I decided to replace my original 2014 PPV struts. I was getting some unpleasant rebounding after bumps and they were rusty as heck.

Here is a parts list for anyone looking to do the same thing. (The springs weren't replaced)

Struts - Belltech 25004 - 5 rings matched the original ride height.

Strut mounts - Monroe 905910 Strut Mate - includes the strut mount and the front spring upper seat.

Coil spring insulator - KYB SM5717 - these were probably okay but why not

Coil Spring Seat/Insulator - MOOG K160311 - I could feel that the original ones were cracked

I took it to a spring/suspension shop and it was 2 hours labour to remove and install everything. Thanks to everyone who helped me decide on these struts.

I decided to replace my original 2014 PPV struts. I was getting some unpleasant rebounding after bumps and they were rusty as heck.

Here is a parts list for anyone looking to do the same thing. (The springs weren't replaced)

Struts - Belltech 25004 - 5 rings matched the original ride height.

Strut mounts - Monroe 905910 Strut Mate - includes the strut mount and the front spring upper seat.

Coil spring insulator - KYB SM5717 - these were probably okay but why not

Coil Spring Seat/Insulator - MOOG K160311 - I could feel that the original ones were cracked

I took it to a spring/suspension shop and it was 2 hours labour to remove and install everything. Thanks to everyone who helped me decide on these struts.

Stock height?

 

[ppvfan]

Yes, I kept the stock height. The Belltech instructions said to use 6 rings. We did some measuring and it looked like 5 was closer. I called Belltech tech service and they said to use whatever looked best.

 

[Pickensmd]

How’s the ride quality now? I was debating belltech shocks/struts bc full lowering kit for my 2014 PPV.

 

[ppvfan]

How’s the ride quality now? I was debating belltech shocks/struts bc full lowering kit for my 2014 PPV.

It's great. I can't compare it to the original struts because they were shot from Day 1. The rebounding is gone so I don't have to slow down on bumpy stretches of road any more.

 

[RichardCranium]

How’s the ride quality now? I was debating belltech shocks/struts bc full lowering kit for my 2014 PPV.

I've got 40k++ miles on my Belltech, and I'm 2"/3" drop from stock. I don't regret it a bit, nor would change anything on my setup.

 

[natureclone]

When I looked at the Belltech site they must have had six "complete" kits that all lowered approximately the same and some had spindles. What is ideal kit

 

[ppvfan]

I wanted to keep mine at stock height so I can't comment on lowering. For stock height Belltech said to purchase 25004 struts for the front and 2412FF shocks for the rear.